Netgear: Entering PPPoE

Netgear (Routers): Entering PPPoE
Netgear JWNR2000

Login Information

• Gateway - 192.168.1.1, 10.0.0.1, or http://routerlogin.net
  
• Username - admin
• Password - password

Netgear Smart Wizard - Light Blue

Entering PPPoE

1. Plug the computer into a LAN port via an Ethernet cable.
2. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
   
3. The router will then prompt you to enter the user name and password. The default user name and password are: "admin", "password".
   
4. From the left hand menu select Basic Settings.
5. Where it says Does your internet connection require a login select yes.
6. Enter the user name and password for your PPPoE in their respective fields.
7. Select apply.

Netgear Genie - Black/Purple

Entering PPPoE

1. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
   
2. The router will then prompt you to enter the username and password. The default user name and password are: "admin", "password".
   
3. Select the Basic tab from the tabs at the top.
4. Select Internet from the menu on the left
5. Where it asks if your internet connection requires a login select yes.
6. Input in your PPPOE user name and password.
7. Select Apply.

:)

 

Netgear: Entering PPPoE

Netgear (Routers): Entering PPPoE
Login Information

• Gateway - 192.168.0.1 or http://routerlogin.net
  
• Username - admin
• Password - password

Entering PPPoE

1. Plug the computer into a LAN port via an ethernet cable.
2. Login to router by entering
   http://routerlogin.net in to the address bar or by entering the default gateway IP address.
   
3. The router will then prompt you to enter the user name and password.the default user name and password are: "admin", "password".
   
4. From the left hand menu select Basic Settings.
5. Where it says Does your internet connection require a login select yes.
6. Enter the user name and password for your pppoe in their respective fields.
7. Select apply.

 

Netgear: Entering PPPoE

Netgear (Routers): Entering PPPoE
Login Information

• Gateway - 192.168.1.1, 10.0.0.1, or routerlogin.net
• Username - admin
• Password – password

Netgear - Smart Wizard- Light Blue

Entering PPPoE

1. Plug the computer into a LAN port via an ethernet cable.
2. Login to router by entering
   http://routerlogin.net in to the address bar or by entering the default gateway IP address.
   
3. The router will then prompt you to enter the user name and password.the default user name and password are: "admin", "password".
   
4. From the left hand menu select Basic Settings.
5. Where it says Does your internet connection require a login select yes.
6. Enter the user name and password for your pppoe in their respective fields.
7. Select apply.

Netgear - Genie - Black/Purple

Entering PPPoE

1. Login to router by entering
   http://routerlogin.net in to the address bar or by entering the default gateway IP address.
   
2. The router will then prompt you to enter the username and password.
   
   the default user name and password are: "admin", "password".
3. Select the Basic tab from the tabs at the top.
4. Select Internet from the the menu on the left
5. Where it asks if your internet connection requires a login select yes.
6. Input in your PPPOE user name and password.
7. Select Apply.