Netgear: DMZ

Discus and support Netgear: DMZ in XboX Networking Hardware to solve the problem; Netgear (Routers): DMZ DMZ Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP... Discussion in 'XboX Networking Hardware' started by XB1R Hydros, Jun 12, 2014.

  1. XB1R Hydros
    XB1R Hydros Guest

    Netgear: DMZ


    Netgear (Routers): DMZ
    DMZ



    1. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    2. The router will then prompt you to enter the username and password. The default user name and password are: "admin", "password".
    3. Once logged in, select Advanced from the tabs at the top.
    4. Select Setup.
    5. Select WAN Setup from the submenu.
    6. Check the box next to Default DMZ Server if it is not.
    7. Enter the IP address assigned to the Xbox console you wish to DMZ
    8. Select Apply.




    Disable DMZ



    1. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    2. The router will then prompt you to enter the username and password. The default user name and password are: "admin", "password".
    3. Once logged in, select Advanced from the tabs at the top.
    4. Select Setup.
    5. Select WAN Setup from the submenu.
    6. Uncheck the Default DMZ Server
    7. Select Apply.

    :)
     
    XB1R Hydros, Jun 12, 2014
    #1
  2. XB1R Hades
    XB1R Hades Guest
    Netgear: DMZ

    Netgear (Routers): DMZ
    Netgear JNR3210

    Login Information

    Netgear Smart Wizard - Light Blue

    DMZ

    1. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    2. The router will then prompt you to enter the user name and password. The default user name and password are: "admin", "password".
    3. From the menu on the left under the advanced section select WAN Setup.
    4. Check the box next to Default DMZ Server.
    5. Enter the IP address assigned to the Xbox console you wish to DMZ.


    Disable DMZ

    1. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    2. The router will then prompt you to enter the user name and password. The default user name and password are: "admin", "password".
    3. From the menu on the left under the advanced section select WAN Setup.
    4. Uncheck the box next to Default DMZ Server.
    5. Select apply.




    Netgear Genie - Black/Purple

    DMZ

    1. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    2. The router will then prompt you to enter the username and password. The default user name and password are: "admin", "password".
    3. Select Advanced from the tabs at the top.
    4. Select Setup.
    5. Select WAN Setup from the submenu.
    6. Check the box next to Default DMZ Server if it is not.
    7. Enter the IP address assigned to the Xbox console you wish to DMZ
    8. Select Apply.


    Disable DMZ

    1. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    2. The router will then prompt you to enter the username and password. The default user name and password are: "admin", "password".
    3. Select Advanced from the tabs at the top.
    4. Select Setup.
    5. Select WAN Setup from the submenu.
    6. Uncheck the Default DMZ Server
    7. Select Apply.
     
    XB1R Hades, Jun 12, 2014
    #2
  3. XB1R Hades
    XB1R Hades Guest
    Netgear: DMZ

    Netgear (Routers): DMZ
    Netgear WNR834M

    Login Information


    Netgear Smart Wizard - Light Blue

    DMZ

    1. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    2. The router will then prompt you to enter the user name and password. The default user name and password are: "admin", "password".
    3. From the menu on the left under the advanced section select WAN Setup.
    4. Check the box next to Default DMZ Server.
    5. Enter the IP address assigned to the Xbox console you wish to DMZ.


    Disable DMZ

    1. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    2. The router will then prompt you to enter the user name and password. The default user name and password are: "admin", "password".
    3. From the menu on the left under the advanced section select WAN Setup.
    4. Uncheck the box next to Default DMZ Server.
    5. Select apply.
     
    XB1R Hades, Jun 12, 2014
    #3
    Error:Failed to connect to localhost port 9200: Connection refused
Thema:

Netgear: DMZ