Netcomm: UPnP

Netcomm (Modems/Gateways): UPnP
NetComm NV6

Login Information:

Default Gateway – 192.168.1.1

Username – admin

Password – admin

UPnP

1. Open a web browser.

2. Enter http://192.168.1.1 in the address bar and press enter.

3. Enter “admin” for both the username and password in the resulting pop up.

4. Select Advanced from the menu across the top.

5. Select Local Network from the menu on the left.

6. Select UPnP from the resulting submenu.

7. Toggle UPnP on or off depending on the situation.

8. Click the Apply button to save any changes.

:)

 

Netcomm: UPnP

Netcomm (Modems/Gateways): UPnP
Login Information

• Gateway – http://192.168.1.1
• Username – admin
• Password – admin

UPnP

1. Open a web browser.
2. Enter http://192.168.1.1 into the address bar.
   
3. When prompted enter admin for both the username and password.
4. Under the Advanced tab select Local Area Network (LAN).
5. Check or uncheck "Enable UPnP".
6. Click Apply/Save.

 

Xbox 360 only device not connecting to Internet

May I ask about the Netcomm router configuration?

Is Universal Plug and Play enabled?

is Port Forwarding or DMZ enabled?

FYI, UPnP is good, Port Forwarding (and DMZ) are bad. Port Triggering is the reliable solution when there are multiple Xboxen.

Just to confirm, did you do the power cycle this way?:

1) turn off the Xbox then

2) unplug the power from the Netcomm

3) unplug the power from the ADSL modem.

4) Wait at least 30 secs then replug the modem power.

5) Wait 'til the light on the front of the modem which says ONLINE, READY, or DSL is on solid (not flashing), then plug in the Netcomm.

6) Wait until the WiFi light on the Netcomm is on.

7) Turn on the new Xbox, try to connect.

8) Turn on the old Xbox, try to connect.