Need help getting NAT open (running out of ideas)

So I have a Xbox one connected wirelessly to the internet. I am having trouble getting it out of moderate and into open. I have Verizon Fios and the internet currently goes from Fios/ONT -> Verizon Router/Mode, -> Asus rt-N66u -> Xbox One. I can't get
the verizon to bridge correctly so I have it DMZ to the Asus rt-n66u. Everything connects to wifi through the Asus router and not the verizon router and the verizon router and Asus router are hardwired. Everything is running the latest firmware.

My current setup for the verizon router is Wireless off, DMZ to the asus router IP, firewall on low. My current setup for the Asus is UPnP disabled, DMZ disabled, port forwarding enabled with ports entered.. I have tried all three, but have had no luck.
Anyone have any ideas that I can try to isolate where the interference is coming from? Also worth noting is that I am connecting via 5gHz due to turtle beach interfering with all 2.4 bands.

Verizon Router: Actiontec MI424WR

2nd Router: Asus RT-N66U

Network Stats:

DL speed 62.17mbps UL speed 31.48 mbps

Packet loss 0% Latency 102 ms

MTU 1480 Wireless Strength 60%

:)

 

Having trouble getting the NAT set to OPEN from being MODERATE!!! Please help!!!

Done all the instructions that was given and still having trouble getting the NAT settings to open. It stays on Moderate no matter what I do. I have Verizon!! I have a D-Link Model number: DSL 2750B its a Wireless ADSL2+Router. Someone please help me with
this I need to find out what I need to do to get this up and running in the correct way with the NAT set to OPEN!!!

 

Help! Rainbow six siege error code 0x838601e7.

Help! Played Rainbow six siege for around a year and yesterday out of blue can’t get on and keep getting this error code 0x838601e7. Googled solutions and checked my NAT type is open but still can’t get on. Any ideas?

i can play all my other games so not an internet connection problem.

 

Suggestion is to put the One into DMZ on the Asus.

Other point: even if you are on moderate you should not face any problems in multiplayer and parties. So if there aren't any problems I wouldn't worry too much about it.

Two questions about your situation:

1. Why do you need to use two routers daisychained?

2. What is your detailed multiplayer connection test saying? To test this, do a normal multiplayer test and then in the result screen please press LT, LB, RT and RB simultaneously and post the results here. Interesting is the detailed NAT status and the
status code.

 

I assume your Actiontec is a Rev before I and doesn't support N.

I would go into the Actiontec and set an ip up for your xbox. Something like 192.168.1.201

then click firewall and port forward the following ports from the Ip you just made.

UDP 88, 500, 3544, 4500

TCP 80

Both 3074, 53

That solve my moderate Nat on xbox one. Those added forwards are necessary.

 

Greetings Mojave!

You can't use the DMZ on your MI424WR, to create a transparent bridge mode. You'll either have to consult

this, or your ISP, how to configured this device to be operating in bridge mode.

Depending of which connectivity mode you use (e.g. PPPoE), your router will be the new client for the authentication process (PPPoE settings), such as your valid username and password.