NAT goes open only after router reset

Hi,

Before we begin troubleshooting, please read:
forums.xbox.com/.../1621667.aspx and post back in full detail (the bits in bold).

Include any troubleshooting steps you have taken so far, so we don't provide steps that may only echo back.

If you are currently using "Instant-On", as your console's power mode, change it to "Energy" power mode and let us know, if by changing the power mode, had any significant change in regard to your NATs behaviour.

Thanks!

If your nat type is open just reset your router, if not do some research on how to fix it. I get the same problem I just reset my router and it goes away.

Right i get this issue all the time where my console goes to strict and without fail i can open it all the time

1 turn router off and hard reset your console may need to do this 3/4 times on the router

2.go to test multiplier once test has done press rt lt rb lb then you nat should be set to open

works everytime for me after 3/4 goes

Right i get this issue all the time where my console goes to strict and without fail i can open it all the time

1 turn router off and hard reset your console may need to do this 3/4 times on the router

2.go to test multiplier once test has done press rt lt rb lb then you nat should be set to open

works everytime for me after 3/4 goes

Recently my router/internet provider had a outage and for days I had strict NAT type on MW, eventually I tried resetting my router had it off for 10 mins then connected. Turned on Xbox reset the console went on MW after the reset NAT type was open again.