My Xbox One S won't show up on the TV following update

Try performing a hard reset EXACTLY like this. Hold the power button on the console for 8 seconds or until the power shuts down completely.
Unplug the power cord from the back of the console for 5 minutes.
Plug the power cord back in and restart the console.

Hi, Aiden! Thank you for reaching out.
I'm AJ, an Independent Advisor for the Xbox Community.
I'm sorry to hear you are experiencing issues with your console.

If you don't mind, I'd like to ask you a few questions:

- To clarify, is your screen displaying "No signal", "Not supported input", or a similar message?

- Besides your TV, do you have any external devices plugged into your console?

- Are you using an HDMI hub/splitter?

--------

- Have you already tried either of the following alternative boot-up methods?

Display reset:

• If there's a disc in the Xbox One console, eject it.
• On the console, press and hold the Xbox button for 10 seconds to turn off the console.
• Press and hold the Xbox button and the Eject button until you hear a beep to turn on the console.
You’ll hear one beep right away and a second beep 10 seconds later. The power light will flash on before the second beep. DO NOT LET GO until the second beep occurs.

* Note: If you have an Xbox One S All-Digital Edition, you’ll need to press and hold the Xbox button and the Bind button instead, as your console does not have an Eject button.

Xbox Startup Troubleshooter:

• Power off your console, and then unplug the power cord to ensure that the console is completely powered off.
• Wait 30 seconds, then plug the power cord back in.
• Press and hold the BIND button and the EJECT button, and then press the Xbox button on the console.

* Note The Xbox One S All-Digital Edition does not have an EJECT button. You can bring up the Xbox Startup Troubleshooter on this console by holding only the BIND button.

• Continue holding the BIND and EJECT buttons for 10-15 seconds.
• Listen for two “power-up” tones a couple of seconds apart. You can release the BIND and EJECT buttons after the second power-up tone.
• The console should power up and take you directly to the Xbox Startup Troubleshooter.

-------

I'll be looking forward to your reply.
Best regards.

This is an error code I've gotten 0x91d70001. I have updated my Xbox One S with the November update. My TV seems to be up to date as well.

After the update my Vizio tv can no longer be controlled or turn on/off by the Xbox One. It was working fine before 5 he update. It won't let me set it up like before since Xbox recognizes my TV.

My xbox one has a disc stuck in.it and it won't play any of the games. When I turn it back on it doesn't show up on the tv