My xbox 360 controller blink twice and did connect to console I have also replace battery...

If your Xbox Series X controller blinks twice, it usually means that the batteries are low or the connection with the console has been lost. Here's what you can try:

1. Replace the batteries: If the batteries are low, the controller will blink twice repeatedly. Try replacing the batteries with fresh ones and see if it solves the problem.

2. Re-sync the controller: To re-sync the controller with the console, press and hold the pairing button on the console until the light starts flashing. Then, press and hold the pairing button on the controller until the light on the controller begins to blink rapidly. Wait a few seconds for the controller to connect.

3. Check for interference: Certain wireless devices or objects may interfere with the controller's signal. Make sure there aren't any devices or obstacles blocking the signal between the controller and the console.

If none of the above solutions work, you may need to contact Xbox support for further assistance.

Hi there,

I don't really understand the issue you are having. Do you have issues connecting your controller to the Xbox 360 console?
If so please see this troubleshooting page for some steps to try:

https://support.xbox.com/help/xbox-360/accessories/xbox-360-wireless-controller-cannot-connect



If there is a different issue please provide some more information about the problem you are experiencing.

Thanks for the reply. Interesting, I did not know that it was "wirelessly" connected while connected to a USB C Data Cord. As soon as I unplug, it stays disconnected (in sync mode the controller also keeps blinking then turns off). If this is right I don't know why I also can't sync any of my other Xbox controllers to the series X unless connected with a cord (works on an One X controller also, stops when unplugged). I don't know why the sync button (blinking) stopped operating all together.

I replaced my batteries and tried to pull and place back in earlier with no luck. I also updated the controller as I set up as new.

The interesting thing is I am able to use the series X controller perfectly on PC wirelessly with windows 10/Xbox PC adapter. I have no problems on PC wireless.

Hello Dominic S, my name is zahir.

Have you tried to use a usb cable directly to the xbox and try to do a controller update.

A fast blinking light indicates that your Xbox controller is trying to connect to a console or PC. Slow blinking usually indicates that there is likely an issue with the battery pack. The most common causes of a blinking Xbox controller include: The controller battery is possibly drained or dying and must be replaced.

How do I resync my controller?

Turn on your Xbox One console and hold down the “SYNC” button on your controller simultaneously with the “SYNC” button on your console. Hold these buttons down together until the light on your controller begins to flash rapidly, then release both “SYNC” buttons.

If this does not work please use link for controller service.

https://support.xbox.com/en-ZA/help/hardware-network/warranty-service/getting-your-product-serviced

When holding the sync buttons on the console and controller, the light blinks on the controller as if it is going through the syncing but then the light will start to blink steady or rapidly.........I did insert new batteries.....