My Series S update/network problems. Won’t connect to wireless internet, says wired is...

Are you using a wired or wireless internet connection?

Try a wired connection (ethernet cable) to your network hardware and restart the console. It should connect and do the required OS update.

If wireless choose a factory refresh of the console. After the refresh is complete, input the console setup details again.

Setup new Series X S has further details.

I’ve tried wired and wireless. When I use wireless I can see my network and try to connect. Sometimes it says “You’re good to go!” And when I try to add my profile back it won’t let me.

I’ve reset my Xbox and now I cannot add it back because it’s not connecting.

I have troubleshot my internet as well with my ISP. The issue is not on their end.

Hope this helps.

This problem occurs when some files in the update are missing or Windows Update database on the computer is inconsistent with the database instructions in the update.

As you are unable to connect to the network, initially we will troubleshoot internet connection issue.

-Are you using wired/wireless network connection?

Limited connectivity means the PC has successfully connected to the router, but the PC wasn't assigned a valid IP address, so you can't actually get to the Internet. It can also indicate that a valid IP address was assigned but that the PC doesn't have Internet connectivity. If you're connected to a home network, try restarting the router.

Step 1:

Run the network troubleshooter to diagnose and repair any problem related to your network. Access the link mentioned below for steps:

http://Windows.microsoft.com/en-US/Windows7/Using-the-Network-troubleshooter-in-Windows-7

Step 2:

One of the components of the Internet connection on your computer is a built-in set of instructions called TCP/IP. TCP/IP can sometimes become damaged or corrupted. If you cannot connect to the Internet and you have tried all other methods to resolve the problem, TCP/IP might be causing it.

Refer the help article to reset Internet Protocol (TCP/IP).

http://support.microsoft.com/kb/299357

For reference:

For a full list of steps to try, see the Wired and Wireless tutorial on this page.

Wired and wireless network connection problems in Windows

http://Windows.microsoft.com/en-US/...reless-network-connection-problems-in-Windows

done through wireless as my modem is in a different room . xbox will connect to my network , network will connect to internet, problem comes when internet tries to connect to xbox live, this is when the updat notice appears .

Hello Adam I, My name is Khaji I am an independent advisor and I will be happy to help you today.

Unfortunately, encountering a blank screen when trying to log in to your Xbox Series S can be frustrating. Here are some additional steps you could try to try to resolve this issue:

Check your internet connection: Make sure your Xbox Series S is connected to the internet correctly. Check your wireless or wired connection to make sure it is working properly.

Check network settings: Access the network settings on your Xbox Series S to ensure that it is connected to the appropriate network and that the network settings are correct.

Clear the console cache: Turn off the Xbox Series S completely (you can do this by holding down the power button for a few seconds) and disconnect it from the power for a few minutes. Then plug it back in and turn it on to see if this resolves the issue.

Try a different user profile: Try signing in with a different user profile, if possible. This could help determine if the issue is tied specifically to your Xbox profile or is more generalized.

Update your console: Check to see if there are software updates available for your Xbox Series S and try to install them. Sometimes system updates can fix performance or bug issues.

Thank you very much for your patience and understanding! If you need anything else, do not hesitate to contact us again.