My One's power/disc eject buttons are non-responsive.

Sorry to hear it. If the console's power and eject button don't work then you may need to send it in for a repair.

However, before you do that please try the power cycle again but this time unplug it and leave it sit for 5 minutes to see if that helps at all.

My xbox one is not turning on, i tried the power reset technique, supply is hsowjng orange light, when i press the power button nothing happen also i tried to press disc eject button but no response? What to do?

My name is Loren. I'm an Independent Advisor, and I'll be glad to help you today.

Try this:

- If there's a disc in the Xbox console, eject it.

- On the console, press and hold the Xbox button for five seconds to turn off the console.

- Press and hold the Xbox button and the Eject button until you hear a beep to turn on the console. You will hear one beep right away and a second beep 10 seconds later. The power light will flash on before the second beep. DO NOT LET GO until the second beep occurs.

If that doesn't work then please do this:

- Turn your Xbox off

- Press and hold both the bind button and the eject button on your Xbox.

NOTE: The bind button is the one you use to sync wireless controllers to your Xbox, and the eject button is the one you use to eject discs.

- With the bind and eject buttons still held down, press and release the power button. At this time, you will hear a startup chime.

- Continue holding the bind and eject buttons until you hear the startup chime a second time

- Release the bind and eject buttons.

- Select Reset this Xbox from the menu.

- Choose the option "Keep my games & apps"

Okay back again... no ugly sound that others have been reporting, but I've noticed after long press of power button disc is read and runs perfectly fine. When I go to change discs I press eject once. It then ejects disc and immediately pulls the disc back
in. No message will pop up sayingdisc is dirty or damaged, but it will still say insert disc in the lower right box. I press eject and it ejects normal. Put disc back in and that's when the message pops up saying it's dirty or damaged. Then have to press power
button for reset or full power off and it will run the next disc fine until I eject and it pulls disc back on its own.

Try performing a hard reset EXACTLY like this. Hold the power button on the console for 8 seconds or until the power shuts down completely. Unplug the power cord from the back of the console for 5 minutes. Plug the power cord back in and restart
the console. Once that is finished try the button again.

If that doesn't help you can eject the disc using the manual method.
https://support.xbox.com/en-US/xbox-one/console/manually-eject-disc

If you still can eject with the button you should contact support direct for a possible repair. https://support.xbox.com/contact-us