My new xbox controller keep disconnecting on my series x

It was working fine like a week ago but its now just started flashing sometimes when I play saying its not connected and I have to unplug it for it to work again. I've spent alot of money on this console and it's ruining my experience please fix
this!!!

I have tried your solution and it only worked temporarily. Takeing out the battery's and putting them back in after a few minutes also works. However, after turning the console off and turning it on later I found that the problem came back

Hi, Myles! Thank you for your reply and the additional information.

Would you mind giving this a try?

- Press and hold your controller's Xbox button until it shuts down.
- Remove your controller's batteries and USB cable (if plugged in) for a minute or two.
- Remove your headset from the controller's 3.5mm port.
- Press and hold your console's power button until it shuts down.
- Remove all external devices from the console's USB ports.
- Unplug your console's power cord for 5 minutes. If you have the original Xbox
One, you'll need to unplug the power supply unit from both the console and the
outlet.
- Plug the power cord back in, and make sure to use one of the wall's outlets.
- Turn your console on and check if the issues persist.

If that doesn't work, I'd suggest using a fresh set of batteries or plugging your controller in via a USB cable to verify if you experience similar issues. Please do let me know if you have already tried any of these.

I'll be looking forward to your reply.
Best regards.

I am using the original xbox one model

Yes the controller will randomly disconnect by itself. It also turned off when I plugged in one of my headsets.

The controller I mentioned is the normal xbox series controller.

Yes I updated the controller and the problem still continues.

I think it might be a connection issue it still disconnects but less depending on where I am