Motorola/Netopia: Restoring Factory Defaults

Discus and support Motorola/Netopia: Restoring Factory Defaults in XboX Networking Hardware to solve the problem; Motorola/Netopia (Modems/Gateways): Restoring Factory Defaults Motorola CPEi 150 Login Information: Default Gateway – Web Server's Default Page... Discussion in 'XboX Networking Hardware' started by XBR Poseidon, Oct 14, 2014.

  1. XBR Poseidon
    XBR Poseidon Guest

    Motorola/Netopia: Restoring Factory Defaults


    Motorola/Netopia (Modems/Gateways): Restoring Factory Defaults
    Motorola CPEi 150

    Login Information:

    Default Gateway – Web Server's Default Page

    Username – none

    Password – motorola





    Restoring Factory Defaults

    Through Firmware

    1. Open a web browser.
    2. Enter Web Server's Default Page in the address bar and press enter.
    3. Enter “motorola” for the password.
    4. Select Personalize from the menu at the top.
    5. Select Restore Factory Settings from the menu on the left.
    6. Check the Restore Factory Settings box.
    7. Click the Apply button.


    Through Hardware

    1. Locate the reset button on the back of the device.
    2. Press and hold the reset button for aprox. 5 seconds.
    3. Release the button and wait for the device to restart.

    :)
     
    XBR Poseidon, Oct 14, 2014
    #1
  2. XBR Dionysus
    XBR Dionysus Guest
    Motorola/Netopia: Restore Factory Defaults

    Motorola/Netopia (Modems/Gateways): Restore Factory Defaults
    Login Information

    • Gateway - 192.168.100.1
    • Login Username - admin
    • Login Password - motorola

    Restore Factory Defaults

    Through Firmware

    *This option is not available on this device*

    Through Hardware

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Locate the reset button on the device.
    3. With paperclip/pen/toothpick hold down the reset button down for 30 seconds.
    4. Wait for lights to turn off then return to normal.
     
    XBR Dionysus, Oct 14, 2014
    #2
  3. XB1R Hades
    XB1R Hades Guest
    Motorola/Netopia: Restore Factory Defaults

    Motorola/Netopia (Modems/Gateways): Restore Factory Defaults
    Motorola - 2210-02 SE Bell Firmware

    Login Information

    • Gateway - 192.168.1.254
    • Login Username – N/A
    • Login Password - Access code: Access code is unique to each modem and is printed on the side of the gateway

    Restore Defaults

    Through Hardware

    1. Locate the reset hole on the back of the device.
    2. Using a toothpick or pen tip press and hold the reset button for aprox. 30 sec.



    Motorola - 2210-02 SW Bell Firmware

    Login Information

    • Gateway - 192.168.1.254
    • Login Username – N/A
    • Login Password - Access code: Access code is unique to each modem and is printed on the side of the gateway

    Restore Defaults

    Through Hardware

    1. Locate the reset hole on the back of the device.

    2. Using a toothpick or pen tip press and hold the reset button for aprox. 30 sec.
     
    XB1R Hades, Oct 14, 2014
    #3
    Error:Failed to connect to localhost port 9200: Connection refused
Thema:

Motorola/Netopia: Restoring Factory Defaults