March update problems

TheW1tchK1ng7 · Mar 17, 2020

I've had a lot of trouble getting my console to turn on since the update. I've had the power go out a few times because of the rain, and my console refuses to start back up afterwards. It will boot to the green Xbox One startup screen, but that's it. It
just stays in limbo like that, for hours. And it can't be a problem with my power brick, because the indicator light is good and I have an APC surge protector on it. I've tried doing a hard reset, unplugging my console, not sure what to do. Also, this never
happened before, so it is a problem being caused by the update.

:)

XBF Brad A

Hi King,

Thanks for reaching out to the forums. We understand having issues with updates. Power outages can be drastic to a console if updating. We recommend trying the

offline update. If you can get the console to pull up the troubleshoot menu try a reset there first.

Unplug the network cable if you're using a wired network connection.
Power off your console, and then unplug the power cord to ensure that the console is completely powered off.
Wait 30 seconds, and then plug the power cord back in.
Press and hold the BIND button (located on the left side of the console) and the
EJECT button (located on the front of the console), and then press the
Xbox button  on the console.
Continue holding the BIND and
EJECT buttons for 10-15 seconds.
Listen for two “power-up” tones a couple of seconds apart. You can release the
BIND and EJECT buttons after the second power-up tone.

If troubleshooter pulls up select reset this Xbox and select one. If not try the offline completely.

Thanks,

Brad

Fortu-6599AA50-3D7A-

The problem was solved himself with the march update

Fortu-6599AA50-3D7A-

The problem solved himsel with the march update

Fortu-6599AA50-3D7A-

The problem solved himself with the march update

TopcowRaven

March update also did not fix the problem, i heard they were shooting for March to fix this issue but no dice so far.

March update problems