lost cable box control

Let me add that it DOES recognize my cable box when it's off or on (aka it will say it lost the signal when I turn it off, and I can see it when it's on), but I can't use voice controls or the controller to navigate my cable box. I have to use the remote
that came with the cable box. So, it's not completely unrecognized by the Xbox, but right now it's basically just running the audio/video through the Xbox without the ability to use the Xbox and its TV features.

Same boat as others. Worked most of the time prior to May update. Scientific Atlanta Explorer 8300 to Xbox one to tv. Straight forward. Cable box set to 720p only and 4:3 ratio. Like recent guy, mine will connect fine with tv app IF I leave my cable box
on ALL the time. If I let Xbox control cable box on and off it almost always resets box to 480p after initial lost signal screen. Come on guys...you are going backwards!!! It was bad enough that Xbox couldn't handle my leaving cable box on 1080I but now 720p
doesn't even stay connected. Something needs to be done to boost signal from cable while using instant on mode. Anyone find a solution.....Please share.

I've had some success with this!!

I'm using the Cisco DTA-250HD box with Cox Communications. I was able to control the box by positioning the cable box at an angle towards the Kinect and then manually entering the code information.

Device control --> cable or sattleite box --> remove cable box --> cable box set up --> enter it manually --> cox cable communications --> select Cox --> enter it --> dta250hd --> select DTA250 --> set IR Delay to slow

Hopefully this helps!!

You cannot as far as I know. The Xbox One cannot control those features of the Cable Box. But I do not have cable so I haven't tested it. I have heard it won't control that or the DVR on your cable box.

I forgot to add the most important thing is to get your cable box recognized by going to 1. settings 2.TV & oneguide 3. device control 4. Cable and satellite box 5. Search for your box or manually use satellite box remote control