Linksys: Port Forwarding

Discus and support Linksys: Port Forwarding in XboX Networking Hardware to solve the problem; Linksys (Routers): Port Forwarding Login Information Gateway: 192.168.0.1 Username: leave blank Password: admin Port Forwarding Open a web... Discussion in 'XboX Networking Hardware' started by XB1R Hydros, Aug 15, 2014.

  1. XB1R Hydros
    XB1R Hydros Guest

    Linksys: Port Forwarding


    Linksys (Routers): Port Forwarding
    Login Information



    • Gateway: 192.168.0.1
    • Username: leave blank
    • Password: admin
    Port Forwarding

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    3. When prompted to login, leave the user name blank and type in “admin” for the password.
    4. Select "Applications & Gaming" from the menu at the top.
    5. Select "Port Range Forwarding" from the sub menu.
    6. Locate the first available row.
    7. Enter "Xbox" into the "Application" column.
    8. Enter 3074 into both the "Start" and "End" columns.
    9. Select "Both" from the "Protocol" column drop down menu.
    10. Enter the last digit(s) of the IP address on the Xbox into the "IP Address" column.
    11. Check the "Enable" check box.
    12. Select Save Settings.


    Disable Port Forwarding

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    3. When prompted to login, leave the user name blank and type in “admin” for the password.
    4. Select "Applications & Gaming" from the menu at the top.
    5. Select "Port Range Forwarding" from the sub menu.
    6. Locate the desired port forwarding rule.
    7. Uncheck the "Enable" check box.
    8. Select Save Settings.

    :)
     
    XB1R Hydros, Aug 15, 2014
    #1
  2. XBR Poseidon
    XBR Poseidon Guest
    Linksys: Port Forwarding

    Linksys (Routers): Port Forwarding
    Login Information

    • Default Gateway - 192.168.1.1
    • Login Username - "Leave Blank"
    • Login Password - admin

    Port Forwarding

    1. Set a manual IP address on the xbox. (click here to find out how to do this)
    2. Open a web browser.
    3. Log into the router by entering the default gateway (192.168.1.1) into the address bar of the internet browser.
    4. When prompted, leave the user name blank and enter "admin" for the password.
    5. Select Applications And Gaming from the menu at the top.
    6. Select Port Range Forwarding from the sub menu.
    7. In the first available empty box type "Xbox360" for the Application.
    8. Enter "3074" in both the Start and End boxes.
    9. For Protocol select "Both" from the dropdown.
    10. Type in the last octet of the IP address that was set in the xbox.
    11. Check the Enable box.
    12. Click Save Settings.


    Disabling Port Forwarding

    1. Set a manual IP address on the xbox. (click here to find out how to do this)
    2. Open a web browser.
    3. Log into the router by entering the default gateway (192.168.1.1) into the address bar of the internet browser.
    4. When prompted, leave the user name blank and enter "admin" for the password.
    5. Select Applications And Gaming from the menu at the top.
    6. Select Port Range Forwarding from the sub menu.
    7. Uncheck any of the Enable boxes for rules set up for the xbox.
    8. Click Save Settings.
     
    XBR Poseidon, Aug 15, 2014
    #2
  3. XBR Dionysus
    XBR Dionysus Guest
    Linksys: Port Forwarding

    Linksys (Routers): Port Forwarding
    Login Information



    *Note* If Cisco Connect was used to configure the router then there are several other options for logging in.

    One method is to use Cisco Connect again. Once the program has started click "Router Settings". Your network name and password are listed on the right. From here you can update this information should you choose.

    Second method is from within Cisco Connect Choose router settings and then from the right column choose advanced and follow the on screen instructions to get to the web based interface.

    Port Forwarding

    1. Set a manual IP address on the xbox.
    2. Open a web browser.
    3. Log into the router by entering the default gateway (192.168.1.1) into the address bar of the
      internet browser.
    4. The router will then prompt for a user name and password. The default is that user name is “admin” and the password is “admin”.
    5. Select Applications And Gaming from the top.
    6. Select port range forwarding from the sub menu.
    7. In the first available empty box type Xbox360 for the Application
    8. Enter 3074 in both the Start and End boxes.
    9. For Protocol select Both from the dropdown.
    10. Type in the last octet of the IP address that was set in the xbox.
    11. Check the Enable box.
    12. Click Save Settings at the bottom.


    Disable Port Forwarding

    1. Set a manual IP address on the xbox.
    2. Open a web browser.
    3. Log into the router by entering the default gateway (192.168.1.1) into the address bar of the
      internet browser.
    4. The router will then prompt for a user name and password. The default is that user name is “admin” and the password is “admin”.
    5. Select Applications And Gaming from the top.
    6. Select port range forwarding from the sub menu.
    7. Uncheck any boxes that are enabled for port 3074 or Xbox Live.
    8. Click Save Settings at the bottom.
     
    XBR Dionysus, Aug 15, 2014
    #3
    Error:Failed to connect to localhost port 9200: Connection refused
Thema:

Linksys: Port Forwarding