Linksys: Firmware Update

Linksys (Routers): Firmware Update
Login Information

• Gateway: 192.168.0.1
• Username: leave blank
• Password: admin

How To Find Firmware Version

1. Open a web browser.
2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
   
3. When prompted to login, leave the user name blank and type in “admin” for the password.
   
4. Select "Status" from the menu at the top.
5. Select "Router" from the sub menu.
6. The firmware version will be labeled as "Firmware Version".

Firmware Update

Note: You will need to download firmware form the manufacturer’s website before you begin this process.

1. Connect the computer to one of the LAN ports on the router via an Ethernet cable.
   
2. Open a web browser.
3. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
   
4. When prompted to login, leave the user name blank and type in “admin” for the password.
   
5. Select "Administration" from the menu at the top.
6. Select "Firmware Upgrade" from the sub menu.
7. Select the “Browse” button. Locate the firmware file you downloaded and click ok.
   
8. Once the file has added select the “Upgrade” button. The device will begin the update process, do not interrupt the process wait for the update to finish. The device will reboot once its finished.
   

:)

 

Linksys: Firmware Update

Linksys (Routers): Firmware Update
Login Information

• Gateway - 192.168.1.1
• Username - admin
• Password - admin

*Note* If Cisco Connect was used to configure the router then there are several other options for logging in.



One method is to use Cisco Connect again. To use this, you will have to search for in All Programs in the Start Menu on the computer that you installed the Cisco Connect Software on.



Once the program has started, click where it says change in the section labeled "Router Settings". Your network name and password are listed on the left in the section titled Personalize. From here you can update this information should you choose to by
clicking on change.



The second method is through a web based utility that you can access through Cisco Connect. To access the web based utility, Choose router settings from the main Cisco Connect menu. Then from the section on the right, click on Advanced Settings. There will
be a warning that will come up, telling you that this web utility is for expert use only. Click “OK” on this screen.

How to Find Firmware Version

1. Open a web browser.
2. Log into the router by entering the default gateway(192.168.1.1) into the address bar of an internet browser.
   
3. When prompted, enter in "admin" for the user name and "admin" for the password.
   
   *Note* If Cisco Connect was used to configure the router then the password will be your wireless password.
   
4. From the menu at the top, click on Status.
5. The firmware version is listed at the top of this page.

Firmware Update

1. Plug the computer into a LAN port via an ethernet cable.
2. Open a web browser.
3. Log into the router by entering the default gateway (192.168.1.1) into the address bar of an internet browser.
   
4. When prompted, enter in "admin" for the user name and "admin" for the password.
   
   *Note* If Cisco Connect was used to configure the router then the password will be your wireless password.
   
5. Select Administration at the top.
6. Click Firmware Upgrade from the sub-menu.
7. In an alternate web browser or tab go to
   www.Linksys.com and download the updated software.
8. Click Browse.
9. Locate and select the file you just downloaded and uncompressed.
10. Click Start Update to send the software to the router. This loads the new software in the router and causes the router to restart. Note: Do not try to go online, turn off the router, shutdown the computer or do anything else to the router until the router
    finishes restarting! Wait a few more seconds before doing anything.
11. Click Status at the top and check the Firmware Version to verify that your router now has the new software installed.
    

 

Linksys: Firmware Update

Linksys (Routers): Firmware Update
Login Information

• Gateway - 192.168.1.1
• Username - empty
• Password - admin

How To Find Firmware Version

1. Plug the computer into a LAN port via an ethernet cable.
2. Open a web browser.
3. Log into the router by entering the default gateway (192.168.1.1) into the address bar of the internet browser.
   
4. By default leave the user name and enter in "admin" for the password.
5. From the menu at the top, click on status.

Update Firmware

1. Plug the computer into a LAN port via an ethernet cable.
2. Open a web browser.
3. Log into the router by entering the default gateway (192.168.1.1) into the address bar of the internet browser.
   
4. By default leave the user name and enter in "admin" for the password.
5. Select Administration at the menu at the top.
6. Click Firmware Upgrade from the sub-menu.
7. In an alternate web browser or tab go to
   www.Linksys.com and download the updated software.
8. Click Browse.
9. Locate and select the file you just downloaded and uncompressed.
10. Click "Start Update" to send the software to the router. This loads the new software in the router and causes the router to restart. Note: Do not try to go online, turn off the router, shutdown the computer or do anything else to the router until the router
    finishes restarting! Wait a few more seconds before doing anything.
11. Click Status at the top and check the Firmware Version to verify that your router now has the new software installed.