Linksys: Entering PPPoE

Linksys (Routers): Entering PPPoE
Linksys EA6500



Login Information



Username - admin

Password - admin

Gateway - 192.168.1.1

Entering PPPoE

This feature is unavailable.

:)

 

Linksys: Entering PPPoE

Linksys (Routers): Entering PPPoE
Login Information

• Gateway: 192.168.0.1
• Username: user
• Password: (provided by the ISP) (or left blank)

Entering PPPoE

1. Open a web browser.
2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
   
3. When prompted. Enter in “user” for the user name and the provided password from your ISP (if they did not provide a password the field should be left blank, should that not work please contact your ISP for the password).
   
4. Select Router from the menu at the top.
5. Select Wan Setup from the submenu below that.
6. Enter your relevant PPPoE information into the PPPoE settings area.
7. Select Submit All Changes near the bottom of the page.

 

Linksys: Entering PPPoE

Linksys (Routers): Entering PPPoE
Login Information

• Gateway: 192.168.1.1
• Username: admin
• Password: admin

Entering PPPoE

1. Open a web browser.
2. Log into the router by entering the default gateway (192.168.1.1) into the address bar of the internet browser.
   
3. When prompted, enter "admin" for the user name and "admin" for the password.
4. Select "Setup" from the menu at the top.
5. Select "Network" from the sub menu.
6. Locate the "WAN Connection Type" section for "WAN1"
7. From the drop down menu, select "PPPoE".
8. Enter the PPPoE User Name and Password provided by your internet service provider.
   
9. Select the radio button for "Keep Alive".
10. Select Save Settings.

**Note: This device has dual WAN ports. WAN1 is labeled as "Internet" on the device, where as WAN2 is labeled as "DMZ/Internet". In order for the PPPoE entry to be effective the modem must be plugged into the corresponding port via Ethernet cable.