Linksys: DMZ

Linksys (Routers): DMZ
Linksys EA6500



Login Information



Username - admin

Password - admin

Gateway - 192.168.1.1

DMZ

1. Open a web browser.
2. Log into the router by entering the default gateway (192.168.1.1) into the address bar of the internet browser.
   
3. When prompted, enter in "admin" for the user name and "admin" for the password.
   
   *Note* If Cisco Connect was used to configure the router then the password will be your wireless password.
   
4. From the menu on the left select Security.
5. From the menu at the top select DMZ.
6. Toggle DMZ to ON.
7. In the source IP Address select Any IP Address.
8. In the Destination IP Address select MAC Address.
9. After selecting MAC Address click View DHCP Client Table.
10. Select the Xbox from this list.
11. Select Apply.

Disable DMZ

1. Open a web browser.
2. Log into the router by entering the default gateway (192.168.1.1) into the address bar of the internet browser.
   
3. When prompted, enter in "admin" for the user name and "admin" for the password.
   
   *Note* If Cisco Connect was used to configure the router then the password will be your wireless password.
   
4. From the menu on the left select Security.
5. From the menu at the top select DMZ.
6. Toggle DMZ to OFF.
7. Select Apply.

:)

 

Linksys: DMZ

Linksys (Routers): DMZ
Login Information

• Gateway: 192.168.1.1
• Username: admin
• Password: admin

DMZ

1. Open a web browser.
2. Log into the router by entering the default gateway (192.168.1.1) into the address bar of the internet browser.
   
3. When prompted, enter "admin" for the user name and "admin" for the password.
4. Select "Setup" from the menu at the top.
5. Select "DMZ" from the sub menu.
6. Select the "Enable" radio button for the "DMZ Hosting" option.
7. Enter the last digit(s) of the IP address on the Xbox into the "DMZ Host IP Address" field.
   
8. Select Save Settings.

Disable DMZ

1. Open a web browser.
2. Log into the router by entering the default gateway (192.168.1.1) into the address bar of the internet browser.
   
3. When prompted, enter "admin" for the user name and "admin" for the password.
4. Select "Setup" from the menu at the top.
5. Select "DMZ" from the sub menu.
6. Select the "Disable" radio button for the "DMZ Hosting" option.
7. Select Save Settings.

 

Linksys: DMZ

Linksys (Routers): DMZ
Login Information

• Gateway - 192.168.1.1
  
• Username - (blank)
  
• Password - admin
  

DMZ

1. Open a web browser.
2. Log into the router by entering the default gateway (192.168.1.1) into the address bar of the internet browser. When prompted leave user name blank and use "admin" for the password.
   
3. Select Applications And Gaming from the menu at the top.
4. Select DMZ from the sub-menu.
5. Select Enable radio button.
6. Leave the Source IP address as it is but change the Destination to "MAC Address"
   
7. Click DHCP Client Table.
8. A page showing all the connected devices should pop up, on this page locate the xbox via the IP or MAC address and click the Select button.
   
9. This should fill in the MAC address field on the previous page.
10. Click Save Settings.

Disable DMZ

1. Set a manual IP address on the xbox. (click here to find out how to do this)
2. Open a web browser.
3. Log into the router by entering the default gateway (192.168.1.1) into the address bar of an internet browser.
   
4. The router will then prompt for a user name and password. By default leave the user name blank and enter in "admin" the password.
   
5. Select Applications And Gaming from the top.
6. Select DMZ from the sub menu.
7. Select Disable radio button.