Linksys: Device Manual

Linksys (Routers): Device Manual
Login Information

• Gateway: 192.168.0.1
• Username: leave blank
• Password: admin

Device Manual

Click
here to go to a manual for this device.

:)

 

Linksys: Device Manual

Linksys (Routers): Device Manual
Login Information

• Gateway - 192.168.1.1
  
• Username - admin
  
• Password - admin
  

One method is to use Cisco Connect again. To use this, you will have to search for in All Programs in the Start Menu on the computer that you installed the Cisco Connect Software on.



Once the program has started, click where it says change in the section labeled "Router Settings". Your network name and password are listed on the left in the section titled Personalize. From here you can update this information should you choose to by
clicking on change.



The second method is through a web based utility that you can access through Cisco Connect. To access the web based utility, Choose router settings from the main Cisco Connect menu. Then from the section on the right, click on Advanced Settings. There will
be a warning that will come up, telling you that this web utility is for expert use only. Click “OK” on this screen.

Device Manual

Click
here to go to a manual for this device.

 

Linksys: Device Manual

Linksys (Routers): Device Manual
Login Information

• Gateway - 192.168.1.1
• Username - admin
• Password - admin

*Note* If Cisco Connect was used to configure the router then there are several other options for logging in.



One method is to use Cisco Connect again. To use this, you will have to search for in All Programs in the Start Menu on the computer that you installed the Cisco Connect Software on.



Once the program has started, click where it says change in the section labeled "Router Settings". Your network name and password are listed on the left in the section titled Personalize. From here you can update this information should you choose to by
clicking on change.



The second method is through a web based utility that you can access through Cisco Connect. To access the web based utility, Choose router settings from the main Cisco Connect menu. Then from the section on the right, click on Advanced Settings. There will
be a warning that will come up, telling you that this web utility is for expert use only. Click “OK” on this screen



Device Manual

There are several versions of this device. Click on the correct version number to go to a link to your device.



v.1



v.2



v.3