led headset

Hello again, thanks for the feedback.

There are several compatible headsets, Microsoft even has its own for Xbox, in wireless and wired versions.

if you choose a wired headset that is not from Microsoft, confirm that it is compatible with Xbox, as these headsets have the CTIA standard on the connector that connects to the controller, but the connection is not made through USB, but through the P3 output that exists on the controller.

More information on the link below.

https://support.xbox.com/en-us/help/hardware-ne...

If you opt for wireless headsets, there are some more expensive models that connect directly to the Xbox, some require a dongle, some don't.

hi Georges thanks for the help - it's a brand new xbox controller...

it is for charging the controller only or connecting to pc/laptop.

the only way to get audio to a headset via xbox is via the 3.5mm jack, if you require power for the led lights then you need to plug into the usb port of the xbox.

Hello, first it's a pleasure to be able to help you today.

My name is welcome to the community.

Hello Chris_2022, you're looking for a Headset, but it wasn't very clear what kind of control you have, you say it has a USB port, would it be the first control model that needed an adapter?

Or your control would also be a third party?

If you can give more details, I'll be waiting for your reply.

This is from TB support page:

In order to play game audio, a wireless headset must be "paired" to its transmitter. The headset and transmitter are paired out of the box. The instructions below are only necessary if pairing appears to have been lost. This can happen if the headset is
turned off for a long time or is out of range.

When the headset and transmitter are paired, the transmitter's Power/Pairing LED will be solid. If this LED is "blinking" slowly (slowly fading in and out), it means the transmitter is not paired with the headset and game audio will not play through the
headset.

The Transmitter sends game audio only. Chat is sent to the headset directly from the controller

Pairing Instructions

1) Turn off the headset by pressing the headset Power button for 3 seconds. The LED on the headset should be completely off when it is powered down.

2) Unplug the transmitter's USB power cable to power it down. Wait 3 seconds and then plug the power cable back in. The transmitter's Power/Pairing LED should now be pulsing slowly on and off.

3) Hold down the transmitter's Pair button for about 5 seconds. Release the Pair button when the transmitter's Power/Pairing LED begins to flash rapidly (twice per second). It should now be blinking quickly and steadily twice per second. If it is blinking
much more than 2 times per second, the button was held for much too long (15+ seconds), and you must start over from Step 2.

4) With the headset still powered off, hold down the headset's Power button for about 6 seconds until you hear a second set of two beeps. The headset's Power LED should now be blinking rapidly like the transmitter (twice per second).

Note: The LED should not be double blinking (two quick blinks followed by a pause). If it is double blinking, then the button was not held long enough, and you must start over from Step 1.

5) Wait about 10 to 15 seconds. The transmitter's Power/Pairing LED should be solid, and the headset's Power LED should now be flashing steadily once per second.

The headset is now paired to the transmitter and is ready to play game audio.

How do I know if my headset and transmitter are in pairing mode?

The transmitter has three different "flashing" patterns. It can be "Pulsing" on and off, which indicates that it is not paired. If you hold the PAIR button for 5 seconds, it will start blinking 2 times a second at an even rate. This is pairing mode.

If you hold the button upwards of 15 seconds, it will start blinking extremely quickly and the transmitter will leave pairing mode. This is not the correct pairing mode. Unplug the transmitter's USB cable if it's gone this far to "reset" the transmitter.

If the headset is paired and game audio is still not working, double check that all the connections are secure and plugged into the appropriate outputs according to the headset's user guide