Kinect used to work with homeworx hw180stb(new version) , doesn't now.

I have the homeworx 180STB. It worked great with my kinect for weeks, but now i have problems. When i select a channel to watch, the digits appear on the tv but then it just re-tunes the channel i am already on. I've tried everything i can think
of... Factory reset homeworx, deleted /reconfigured the xbox's cable box settings, changed the IR delay, reset to 180stb old and new versions, hard restart xbox, clear all tv/oneguide info, etc. When i use kinect to select channel, i watch it recieve
the "2...4...-...1" but nothing happens, i type 24-1 with the homeworx remote and it looks the same on-screen but works.

i can recreate the above error if i add "enter" to the end of the channel command when typed from the remote. Using channel24-1 as an example :

Typing: 2....4....-...1 changes the channel properly, with a THREE SECOND DELAY AFTER the last keystroke is entered, then it changes. .

Typing: 2....4....-....1...enter re-tunes the present channel, INSTANTLY, exactly like when the kinect tries to change channels.

It REALLY seems that there is an unneccessary keystroke after the numbers are typed. Please fix this xbox!

:)

 

Cannot get Homeworx HW180STB to work

As the title says I have a Homeworx HW180STB with IR cables from my xbox. I have tried selecting the brand Homeworx followed by the model HW180STB and the ir commands do not work. I tried letting it guide me through but none of the commands went through.
The only sort of success I had was setting the model to MediaSonic and letting it guide me through and one of the commands for power sent a '6'. When I tried using OneGuide after that it would mute the box so the ir cables are working just not the default
setting for the Homeworx HW180STB. Any ideas? Is there a working remote code?

 

Xbox One won't control my HW150PVR tuner

Having the same problem as @JWelhouse with HW180STB. Xbox w/ Kinect doesn't recognize my TV voice commands. I've tried all the codes, both new and old versions in set up, etc. Maybe it has to do with the fact that my Kinect is above my TV and the HW180 is
below the TV. Buying an IR receiver to place on the HW180 and see if that helps. Will update in a few days...

HW180STB PVR

Oct 30 2014 11:31:12

MLG-7802-ATSC-V8.0

 

Having the same problem today as well. Worked fine for the couple of months that I've had it previously.

 

I just got the HW180STB and plugged everything in and Im having the same problem.

1) Searched for Mediasonic found it

2) Selected the HW180STB ( New Version )

One Guide Shows all channels for my area and when I select a channel it shows the correct channel being entered but then flashes the old channel and doesnt change.

Side Note - Where do you enter the IR Code if I was to try different ones ?

 

Same issue here as everyone above. Please fix.

 

This broke around the same time as when MS announced their own OTA turner. Hmmmmm