I lost my instructions on binding controllers and connecting xbox one to wifi

Hi TrekerDay!!

Binding controllers is fun and easy, check this out:
support.xbox.com/.../connect-a-wireless-controller

As far as your wireless here you go:
support.xbox.com/.../first-time-connection-solution

To register check this out:
support.xbox.com/.../repair-process

Reach back at us after you performed those steps and we will help you out if you have any more questions!!!!

While I'm not an Xbox Support employee, to my knowledge, the cable from the Play&Charge kit for the Xbox 360 does not carry controller commands. So if you connect a Xbox 360 controller with a Play & Charge kit, the battery will charge, but unless the controller
is "bound" to the console, will not work.

In order to bind a new controller to the console you need to press the Bind buttons on the controller and console.

On the Xbox 360 console, there is a small button next to the Memory Unit slots on the older (rounder) models, or next to the USB front flap on newer (Slim and E model) consoles.

Press the Bind button on the console, and the Ring of Light on the console should rotate. Now press the small bind button on the front of the controller (between the LB RB buttons, right next to the connector there is a button with a "o)))" symbol). The
controller's "Ring of Light" should also rotate shortly, and eventually connect. If the controller connected properly, it will have the appropriate segment lit up.

As for the update: Even if you don't connect to others, each Xbox console that connects to Xbox Live (e.g. for game downloads, cloud based savegames to transfer to Xbox One later, media streaming), each Xbox 360 console HAS TO be on the latest system software
to be able to connect to Xbox Live.

I hope this instruction helped you to get the new controller working with your console.

Hello!

The controller won't bind to the adapter

If the binding instructions are not working, try the following solutions:

• Ensure you're within range (6 meters or less) of the adapter and it's in line of sight to the controller.
• If you have an Xbox controller, try rebinding your controller to the console by pressing the Connect button on the console, and then the Connect button on the controller. The LEDs will flash and become solid when the binding is successful. If your controller
  does bind, you have isolated the issue to the Wireless Adapter for Windows. If your controller does not bind to your console, see Set
  up the Xbox Wireless Adapter for Windows.
• Unplug your adapter, reboot your device, and then plug it back in (to another port if possible), and try again.

A

you can check this:

https://support.xbox.com/en-US/xbox-on-windows/accessories/troubleshoot-xbox-wireless-adapter-for-windows

You don't need to plug the reciever from the set into your Xbox 360 console (in fact the reciever wouldn't work on the console).

Instead, simply bind the controller itself to your console directly, as per
the instructions that Taidara linked.

Only the PC will need the wireless reciever.

If you wish to use the controller on the PC again, you'll have to bind the controller with the wireless reciever on your PC again, by pressing the button on the wireless reciever, and the bind button on the controller.

OK I'll try binding it. Thanks guys!

You don't need to plug the reciever from the set into your Xbox 360 console (in fact the reciever wouldn't work on the console).

Instead, simply bind the controller itself to your console directly, as per
the instructions that Taidara linked.

Only the PC will need the wireless reciever.

If you wish to use the controller on the PC again, you'll have to bind the controller with the wireless reciever on your PC again, by pressing the button on the wireless reciever, and the bind button on the controller.