How to use macbook to output picture from XBox Series S?

It would have to be parallel s or windows 10 based

If you are talking about m1 laptop then no as windows isn't arm compatible

you cant, the xbox app that allows the streaming from the xbox one etc is only on windows. you could use xcloud but that is not the best and is only in beta at the moment through web browsers.

laptops, mac included also don't allow you to plug in any hdmi source to view on the screen unless you use a capture card and even then that would not be the best way to play.

Yes. The HDMI port on the Series S is an output. So you would just plug an HDMI cable from the Series S to your TV.

Hello again, the console's HDMI IN only accepts input signal, i.e. receives signals from another device.

If your console is Xbox One S or X, you have the Optical Output (S/PDIF) Out that can be connected to your Speaker if it has (S/PDIF) In.

If your console is series s or x it won't have this output.

I don't know what inputs and outputs you have in your speaker, so I don't know which connection would be best to use.

Hi, Andy my name is Oskayra, and will be a pleasure help you

The issue you're encountering is likely due to a compatibility issue between the native resolution of your Xbox Series S and the maximum resolution supported by your HP w2408h monitor.

The Xbox Series S outputs a native resolution of 1920x1080, which is slightly different from the maximum resolution of 1920x1200 supported by your monitor. This mismatch is causing your monitor to display an "input signal out of range" message.

To resolve this issue, you'll need to adjust the output resolution of your Xbox Series S to match the native resolution of your monitor, which is 1920x1080. Here's how to do it:

On your Xbox Series S, navigate to Settings > General > TV & Audio > Video modes.

Under "Resolution," select "1920x1080" from the available options.

Once you've selected the desired resolution, restart your Xbox Series S.

After restarting, your Xbox Series S should output a resolution that is compatible with your HP w2408h monitor, and the "input signal out of range" message should no longer appear.

If you're still having trouble, you can try the following additional steps:

Ensure that your HDMI cable is properly connected to both your Xbox Series S and your monitor.

Try using a different HDMI cable if the one you're using is old or damaged.

Check for any firmware updates for your monitor.

I really hope your problem has been fixed with my help,if this works let me know and have a nice day. Oskayra