How to fix code E203 0000080C 80073CF6

I get the error code
E203 0000080C 80073CF6 So I tried to troubleshoot my Xbox but every time I do I hear the second power up noise
and then my Xbox turns off , but if I let it boot up normally it just loads and pops up the error code

Please don't make Duplicate posts. Check and reply to your original post to stop unnecessary
duplicate answers.

If you need to bring up the Xbox Startup Troubleshooter again, follow these steps:

1. Power off your console, and then unplug the power cord to ensure that the console is completely powered off.
   
2. Wait 30 seconds, then plug the power cord back in.
3. Press and hold the BIND button (located on the left side of the console) and the
   EJECT button (located on the front of the console), and then press the
   Xbox button on the console.
   Note The Xbox One S All-Digital Edition does not have an
   EJECT button. You can bring up the Xbox Startup Troubleshooter on this console by holding only the
   BIND button (steps 3 & 4) and then pressing the Xbox button .
   
4. Continue holding the BIND and EJECT buttons for 10-15 seconds.
   
5. Listen for two “power-up” tones a couple of seconds apart. You can release the
   BIND and EJECT buttons after the second power-up tone.
   
6. The console should power up and take you directly to the Xbox Startup Troubleshooter.
   

To reset your console from the Xbox Startup Troubleshooter, use the
D-pad and A button on your controller to select
Reset this Xbox. When prompted, select Remove everything.

System updates solution has further details.

I recommend you make an appointment with a Microsoft Answer Desk Expert. I had the same issue with my Xbox, and they ended up replacing it under warranty.

I tried it does not make A second noise a hold the buttons for like five minutes