how to find error codes?

how do. i find error codes if ididn't write them down when redeeming a code for minecraft builder pack?

:)

 

Unable to connect to Microsoft Solitaire. Receiving error code 121003

I haven't been able to find any information on the error code 121003 and how to troubleshoot this error.

 

How to Find SSID

Login Info

1. Gateway Address: "192.168.2.1" or try "172.16.0.1" or try "http://gateway.2wire.net/management"***
   
2. Username: Try "admin" otherwise there is no default username.
3. Password: Try "admin" or try “2wire”otherwise there is no default password.

***Note: The Management and Diagnostic Console (MDC) settings are dependent on the 2Wire gateway software release. The MDC are for 2Wire gateways running software release 4.21.x If your gateway is running a software release earlier than 4.21.x, some of these
settings may not be available.





How to Find SSID (Network Name)

1. Connect a computer to your gateway with an Ethernet cable.
2. Open a web browser.
3. Type the gateway address: "192.168.2.1" or try "172.16.0.1" into the web address.
   
4. If prompted for a username and password try "admin" for both the username and password, if the login failed, check your ISP documentation for a different username and password.
   
5. Once logged into the gateway, click on "Home Networks" on the top.
6. Click on the "Summary" subcategory.
7. Your Network name will be located in the "Status at a Glance" page, under "wireless settings".