HOW TO CONNECT XBOX ONE USING IPV6

Hello christianRomquin,

Thanks for posting on the Xbox forums. We understand that you are interested in learning how to use IPv6 instead of IPv4. In order for the Xbox One to connect to the internet using IPv6, your home router needs to have IPv6 enabled, and your internet
service provider (ISP) must support IPv6. We have a support article that provides

more information about IPv6 and how to use it. Be sure to let us know the results
christianRomquin!

Hello Crow,

Thanks for coming to the forums with your question. You can follow this
guide for IPv6.

What if my Xbox One isn’t connected using IPv6?

Your Xbox will work normally without IPv6 connectivity. However, for the best possible experience, we recommend enabling IPv6 on your network. Several Xbox One features already make use of IPv6, and we’re building more.

There is more on how to troubleshoot which is in the router. If you have a gateway/modem may need to enable it there also.

Thanks,

Brad

Xbox One can connect to networks using two protocols that allow devices to transmit information: the traditional IPv4 communications protocol, and its newer version, IPv6. For Xbox One to connect to the internet using IPv6, your home router needs to
have IPv6 enabled, and your internet service provider (ISP) must support IPv6.

https://support.xbox.com/en-US/xbox-one/networking/ipv6-on-xbox-one

IPv6 and Xbox support

IPv6 on Xbox One

Xbox One can connect to networks using two protocols that allow devices to transmit information: the traditional IPv4 communications protocol, and its newer version, IPv6. For Xbox One to connect to the internet using IPv6, your home router needs to have
IPv6 enabled, and your internet service provider (ISP) must support IPv6.

What’s IPv6?

Internet Protocol version 6 is the most current network protocol, bringing several improvements over IPv4. Most important, IPv6 expands the number of possible IP addresses (the unique numbers that represent every device on the internet). And—most useful
for Xbox—the expansion removes the need for
Network Address Translation (NAT), which can interfere with multiplayer gaming and chat over IPv4 networks.

What if my Xbox One isn’t connected using IPv6?

Your Xbox will work normally without IPv6 connectivity. However, for the best possible experience, we recommend enabling IPv6 on your network. Several Xbox One features already make use of IPv6, and we’re building more.

How can I tell if my Xbox is connected using IPv6?

Here’s how to check:

1. On your controller, Press the Xbox button
   to open the guide.
2. Select System > Settings > Network.
   
3. Select Network settings.

If your Xbox One has IPv6 connectivity, your Current Network Status will read
IPv4 & IPv6. (To see your actual IP and gateway addresses, select
Advanced settings.)

My Xbox is using only IPv4. What should I do to add IPv6?

Several home routers support IPv6 but disable it by default. Check the manual for your router, or visit our
Networking Hardware Information support forum.

My router has IPv6 enabled, but my Xbox is connected on IPv4. What else can I do?

Try contacting your ISP to see if IPv6 is available in your area.

Xbox One can connect to networks using two protocols that allow devices to transmit information: the traditional IPv4 communications protocol, and its newer version, IPv6. For Xbox One to connect to the Internet using IPv6, your home router needs
to have IPv6 enabled, and your Internet service provider (ISP) must support IPv6. For more: https://support.xbox.com/en-US/xbox-one/networking/ipv6-on-xbox-one