How to configure ipv6 on Xbox series x

Thank you for contact us! I'm Anderson, an Independent Consultant and a Microsoft user like you.

Good morning

There could be several reasons why your Xbox Series S is not using IPv6, even though your Xbox One is.

Here are a few possible explanations:

IPv6 may not be enabled on your router's LAN settings. Although your Xbox One is able to use IPv6, it's possible that your router's LAN settings are not configured to use IPv6 by default. This could be the reason why your Xbox Series S is not able to use IPv6.

Your ISP may not support IPv6. Even if your router is configured to use IPv6, your ISP may not support it. If this is the case, your Xbox Series S will not be able to use IPv6.

Your Xbox Series S may not be configured to use IPv6. It's possible that your Xbox Series S is not configured to use IPv6 by default. To check this, go to the network settings on your Xbox Series S and make sure that IPv6 is enabled.

Your network cable may not be capable of supporting IPv6. It's possible that your network cable is not capable of supporting IPv6. If this is the case, you will need to replace your network cable with one that is capable of supporting IPv6.

Your Xbox Series S may not be getting an IPv6 address from your router. Even if IPv6 is enabled on your router, your Xbox Series S may not be getting an IPv6 address from your router. To check this, go to the network settings on your Xbox Series S and check if an IPv6 address is assigned.

I recommend checking these possibilities to try to identify the cause of the issue. You may also want to contact your ISP or the manufacturer of your router or Xbox Series S for further assistance.

You could try setting a manual IPv6 address as shown in the forum post here.

https://answers.microsoft.com/en-us...series-x/cc47da81-9a90-442d-90d7-1cdb66802a45

How familiar are you with your router settings and configuration? I understand they might be capable of IPv6, but you might have to configure your DHCP to hand out IPv6 addresses, or set your Xbox One with a static IPv6 address. If you have some questions
about that, let us know.

Additionally, here's a
clickable link for the IPV6 on Xbox link provided by @HackingSpartan8

Hey there!

Nice to meet you! I'm Darhyl, a fellow gamer. I'm sorry you are experiencing this. I am here to help.

If I may ask, may I know which platform device are we referring to here, is it on Windows PC or Xbox console?

If it's on console, to switch from IPv4 to IPv6 on Xbox Series X, you can follow these steps:

On your Xbox Series X, go to Settings.

Select Network.

Select Advanced Settings.

Select IP settings.

Change the "IPv6" setting from "Automatic" to "Manual."

Enter your IPv6 address, subnet prefix length, and default gateway information provided by your Internet Service Provider (ISP).

Save your changes.

Note that not all ISPs support IPv6, so you may need to contact your ISP to confirm if they do and obtain the necessary information to set it up on your Xbox Series X.

Thank you for your time. I hope you have a great day!

Reference link: https://answers.microsoft.com/en-us/xbox/forum/...

How do i install IPv6?

"How do i configure it and where do i get the info or network addresses to do so?"

IPv6 on xbox one may assist you.