How do I stop my controller from disconnecting

Hello, first it's a pleasure to be able to help you today.

My name is welcome to the community and Merry Christmas.

Hello Rojaris, By your description you already tried some procedures.

If you have a USB cable that can connect your controller to the Xbox, follow the steps below.

First, turn off the console and remove the batteries from your controller, then plug the USB cable into the console and controller.

Then turn on the Xbox through the console's Power button and turn on the controller.

Then clear the cache on the console and check if the control has any updates to be made.

1. Go to the Xbox press and hold the XBOX power button on the console for 10 seconds until it turns off

2. Wait 10 seconds until it turns off

3. Wait 1 minute with it off

4. Turn it back on

After the console restarts and I'm at the console start screen, put the batteries back in the controller, remove the USB cable and see if it stays connected.

Hi Mr. C, my name is Daniel. I am an independent advisor who is willing to help you.

For me, it is a pleasure to write to you and try to help you in any way possible, for my part I will do my best to try to solve any doubt/problem you are presenting.

With the intention of helping you, I am going to suggest some solution steps to fix the root problem:

1. Check for wireless interference: Make sure there are no other wireless devices in the area that may be interfering with the signal between your controller and your console. Move any other wireless devices away from your console or turn them off.
2. Power cycle the console and controllers: Unplug the console and controllers from their power source, wait a minute or two, and then plug them back in. This will help clear any temporary data or cache that may be causing the problem.
3. Reset your controllers: On the back of your controller, there is a small reset button. Use a paper clip or small pin to press and hold the button for a few seconds. This will reset the controller and help you reconnect to the console.
4. Replace batteries or use wired connection: If the controller batteries are low, replace them with new batteries. Alternatively, try using a wired connection to see if the issue persists.
5. Try a different controller: If you have access to another controller, try connecting it to your console to see if you experience the same issue. If not, then the problem could be with the original driver.

If none of these steps worked for you, then we will restore your console by saving your games and applications. This process will not delete anything, it will only fix any corrupt files that are on the system. You just have to remember your credentials to log in again.

1. Press the Xbox button to open the guide.
2. Select Profile & system > Settings > System > Console information > Reset console.
3. At the message Reset your console? screen, you will select Reset and keep my games and apps.

Source: https://answers.microsoft.com/en-us...nnecting/f8e8c28f-7b12-44e3-ad0c-3381e6fe5496

Best regards,
Daniel.

How do you disconnect them from your xbox? Having an issue with someone doing this through the app and want it to stop. How do I make it to where my xbox cannot be connected to?

Hi, I am trying to stream a game to my windows 10 but every time I do, the controller stops working, it says that it is not plugged in to the pc otherwise disconnects from my Xbox One, stopping the stream.

anyone know what's going on? I'd be extremely grateful!

Update its happening again I have found a cord but it’s not long enough to play comfortably and have no clue on how to stop It from happening again. The controller is also having a hard time to connecting to the Xbox so if its a problem with my Xbox or controller cause it only disconnects with my headset plugged in and it does it with other controller to.