How do I fix the upnp?

Hi there! This is Ronnie, an independent advisor.

Nice to meet you and I hope you are having a great day!

I understand you need help with your network problem.

You can check this link for more information about the error you are getting and some steps you can do:

https://support.xbox.com/en-US/help/hardware-ne...

Hope that helps!

Hello!

I'm a Independent Advisor. I will be glad to help you.

UPnP is a function that is enabled directly on the router, contact your internet provider and ask them to enable it, also ask them to open these ports:

Puerto 88 (UDP)

Puerto 3074 (UDP y TCP)

Puerto 53 (UDP y TCP)

Puerto 80 (TCP)

Puerto 500 (UDP)

Puerto 3544 (UDP)

Puerto 4500 (UDP)

I hope the information has been clear, I will be attentive to any questions you may have.

Best Regards.

Hi, I hope you're doing great out there. I am an Independent advisor and I am here to help you in regard to your concern.

You may need to manage your router settings.

For the UPnP not successful error please follow the steps below:

"1. Sign in to your router’s setup webpage, and make sure the router’s UPnP setting is turned on. You can usually find first-time help with this in the router manual or on the manufacturer’s support site.

2. Turn the UPnP setting off and save your changes.

3. Restart your console, your modem, and your router.

4. Turn the UPnP setting back on and save your changes. If there’s a Zero Config setting, make sure that’s turned on as well.

5. Restart your modem and router."

In regards to your NAT Type being strict please OPEN the following ports:

Port 88 (UDP)

Port 3074 (UDP and TCP)

Port 53 (UDP and TCP)

Port 80 (TCP)

Port 500 (UDP)

Port 3544 (UDP)

Port UDP 4500 (UDP)

I have here the following links that may be helpful:

https://support.xbox.com/en-US/help/hardware-ne...

https://support.xbox.com/en-US/help/hardware-ne...

Hello!

My name is Dérek, I'm an independent platform consultant and I'm grateful for the opportunity to help you.

SKip, this problem unfortunately happens a lot

So you just need to configure your internet devices now.

They are unconfigured, so have access restrictions, causing these errors.

If you do not have knowledge, I advise you to contact the ISP that they will do for you

set a fixed ip for the console/PC, open the ports described below, disable and enable the UPnP function and disable the modem firewall, if you have a modem and a router the process has to be done on both devices.

Put console/PC IP in DMZ zone.

Port 88 (UDP)

Port 3074 (UDP and TCP)

Port 53 (UDP and TCP)

Port 80 (TCP)

Port 500 (UDP)

Port 3544 (UDP)

Port 4500 (UDP)

You can ask ISP(Internet Service Provider) for help

I remain at your disposal if you have any further questions.

Hi FallenRiven2,

I'm Anirban and I'll be happy to help you.

Usually these settings are resolved by your ISP(Internet Service Provider), you can contact them and they'll guide you how to make the NAT type open and allow the UPnP.

Best wishes