How do i fix party chat error?

Hi Codzilla584, my name is Rodrigo. I'm an Independent Advisor and a member of the Microsoft community and I'd love to assist you today.

I am sorry to hear that.

Please, change your connection DNS.

Follow these steps:

Go to Profile and System > Settings > General > Network Settings.

Select the network you're connected to, then select Advanced settings > Manual

On the DNS field, input these:

Primary: 8.8.8.8

Secondary: 8.8.4.4

Save settings.

Be sure to turn off and the turn back on the UPnP option as well.

If it still does not work, please, if you know how to do it, make a Wi-Fi hotspot router on your phone and connect to it.

That way we can isolate the issue, by testing another internet connection, using your mobile data plan.

In case none of these options work, you can try setting up the DMZ on your router.

There are great guides online*:

https://www.windowscentral.com/xbox-one-dmz-guide

https://www.ubisoft.com/help/connec...article/setting-up-dmz-for-xbox-one/000061024

There is also this complete guide about NAT errors and configuration on the Xbox website, I recommend it:

https://support.xbox.com/help/hardware-network/connect-network/xbox-one-nat-error

----------------------------------------
Setting the DMZ
----------------------------------------

----------------------------------------
A) On your Router
----------------------------------------
1. Make sure to use the ethernet cable connection, it is more reliable than the Wi-Fi one. (If possible)

2. You then, have to assign a static (fixed) IP for your Xbox console on your router, which will enable you to do the next steps

3. Turn on DMZ under the IP you selected for your Xbox Console.

4. Turn on UPnP on your router

By doing that, you'll pretty much have an open and direct connection to the game servers.

----------------------------------------
B) On the Xbox Console
----------------------------------------

Configure the network settings accordingly.

Enter the Settings menu.

Under the General tab, select Network Settings then Advanced Settings.

Take note of the information displayed

Select IP Settings > Manual.

Enter the same IP you configured on your router DMZ.

I hope this helps.

-----
*Note: This is a non-Microsoft website.

The page appears to be providing accurate, safe information.

Watch out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products).

Thoroughly research any product advertised on the site before you decide to download and install it.

Hello Codzilla584,

Have you tried the hotspot connection, did it work?

As for the DMZ, mine is under the NAT Forwarding section of the router.

Try changing it to Advanced Mode, if your router has that option.

But, I highly recommend you contact your Internet Provider, they should be able to do this for you.

If not the DMZ, you can ask them to open the Xbox Port:

Port 88 (UDP)

Port 3074 (UDP and TCP)

Port 53 (UDP and TCP)

Port 80 (TCP)

Port 500 (UDP)

Port 3544 (UDP)

Port 4500 (UDP)

Source:

https://support.xbox.com/help/hardware-network/connect-network/network-ports-used-xbox-live

Hi Rodrigo, thank you very much for the reply and suggestive solutions.

I’ve changed my DNS you suggested however I fairly sure it hasn’t changed the result.

I have access to my router settings but cannot find a DMZ option anywhere. There are options for static routes, however it explains that I must activate the Ethernet WAN mode type.

Let me know if you have any ideas.

Thanks again.

the party chat is still messed , when you get this error you have to try to exit from the party then join it again if this don't work you can try to start a new party chat , i hope they will fix it soon

This is getting silly. Have XB One in DMZ, same with my friends, still no party chat. This shouldn't be new Microsoft... Doesn't matter how many times I reboot or how I join a party / start a party I cannot turn Party Chat on. Fix it MS!!