How do I fix my UPnP and NAT type?

Hi, I hope you're doing great out there. I am an Independent advisor and I am here to help you in regard to your concern.

You may need to manage your router settings.

For the UPnP not successful error please follow the steps below:

"1. Sign in to your router’s setup webpage, and make sure the router’s UPnP setting is turned on. You can usually find first-time help with this in the router manual or on the manufacturer’s support site.

2. Turn the UPnP setting off and save your changes.

3. Restart your console, your modem, and your router.

4. Turn the UPnP setting back on and save your changes. If there’s a Zero Config setting, make sure that’s turned on as well.

5. Restart your modem and router."

In regards to your NAT Type being strict please OPEN the following ports:

Port 88 (UDP)

Port 3074 (UDP and TCP)

Port 53 (UDP and TCP)

Port 80 (TCP)

Port 500 (UDP)

Port 3544 (UDP)

Port UDP 4500 (UDP)

I have here the following links that may be helpful:

https://support.xbox.com/en-US/help/hardware-ne...

https://support.xbox.com/en-US/help/hardware-ne...

Hello what type of network are you using on your Xbox. Because some different types of networks do not support the UPnP and the open nat type that everyone should have

This normally happens on networks such as VPNs & Mobile networks

If you are on your normal network I would recommend you contact your Internet service provider and see what they can do because this would be an issue that they would have to fix for you. From previous experience.

But you can try the troubleshooting and see if that helps I will leave a link for that here for you to try. Click on the blue highlight at the bottom of the page this will take you to the troubleshoot website

Hope this helps

Xbox connection troubleshooting

My nat type is moderate and I can not do party’s I’m not sure what to do and my upnp says not successful. Please help

Thank you for contact us! I'm Anderson, an Independent Consultant and a Microsoft user like you.

Good evening

Enable UPnP (Universal Plug and Play): UPnP allows devices on your network to automatically configure network settings, including NAT types. To enable UPnP on your AT&T hotspot device, access its settings interface (usually through a web browser) and look for UPnP or NAT settings. Enable UPnP if it's not already enabled.

My computer is not letting me open up that link that you sent me. But ill try to be more specific. Well I have the new xbox so it has built in wireless. To fix my NAT type from strict to open I read a forum on here and when I got to the suggestion about
UPnP I fixed mine so it was anabled and that is what changed my NAT type.