How do I connect to IPv6 on my Xbox?

Do you know if you ISP supports IPv6? Your router could be tunneling your IPv4 connection to an IPv6 which basically means it is sending IPv6 packets through an IPv4 connection to communicate with IPv6 servers. I found out myself the xbox doesn't
like this at all. My ISP doesnt support IPv6. When I would look at my connection on my xbox it would say IPv4 and IPv6. So O went into my router settings and sure enough my router was set to tunnel IPv4 to IPv6. I went through set to IPv4 only and it solved
my problem. This causes a teredo error in your xbox.

I'm not sure. How can I check if my router is tunneling it through Ipv4?

How do i install IPv6?

"How do i configure it and where do i get the info or network addresses to do so?"

IPv6 on xbox one may assist you.

Hello B33KER999, I am an independent advisor and I will be happy to help you today. My name is Khaji

To connect your Xbox to IPv6, follow these steps:

Make sure your Internet Service Provider (ISP) supports IPv6. Not all providers offer full IPv6 support, so check before proceeding.

On your Xbox console, go to network settings. You can access this from the main menu by selecting "Settings" and then "Red."

Within network settings, select the network you want to connect to. It can be a Wi-Fi network or a wired connection.

If you are already connected to a network, select "Set up wireless network" or "Set up wired network" as appropriate.

In network settings, look for the option to configure the IP address. You must select the automatic IP address or DHCP option. This will allow your Xbox to obtain an IPv6 address automatically if your ISP supports it.

Save the settings and wait for the Xbox to apply the changes and connect to the network again.

If your ISP supports IPv6 and you have followed the steps above, your Xbox should be connected to IPv6. However, it is important to note that your router and other devices on your network must also support IPv6 for full connectivity.

Here I will also leave you the guide that Xbox offers to solve these problems

https://support.xbox.com/help/hardware-network/connect-network/xbox-one-network-connection-errors

Thank you very much for your patience and understanding! If you need anything else, do not hesitate to contact us again.

https://beta.support.xbox.com/help/Hardware-Network/connect-network/ipv6-on-xbox-one

For Xbox One to connect to the internet using IPv6, your home router needs to have IPv6 enabled, and your internet service provider (ISP) must support IPv6.

Is your router a Netgear as well or is it from your ISP? If it is a Netgear here is a link to the steps to enable IPv6.

https://kb.netgear.com/24006/How-do-I-set-up-an-IPv6-Internet-connection-on-my-Nighthawk-router

If the router is from your ISP then you should contact them to get assistance in changing it if you can't do it form the Admin on your network.

it says IPv4 and service info is unavailable

I called Verizon as I have Fios 1 Gigabit internet and they told me IPv6 has not been rolled out yet in Pittsburgh, PA.