Hitron: Restoring Factory Defaults

Discus and support Hitron: Restoring Factory Defaults in XboX Networking Hardware to solve the problem; Hitron (Modems/Gateways): Restoring Factory Defaults Hitron CGN2 Login Information: Default Gateway – 192.168.1.1 Username – cusadmin Password –... Discussion in 'XboX Networking Hardware' started by XBR Poseidon, Dec 16, 2014.

  1. XBR Poseidon
    XBR Poseidon Guest

    Hitron: Restoring Factory Defaults


    Hitron (Modems/Gateways): Restoring Factory Defaults
    Hitron CGN2

    Login Information:

    Default Gateway – 192.168.1.1

    Username – cusadmin

    Password – login





    Restoring Factory Defaults

    Through Firmware

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select WAN/LAN.
    5. Select Backup.
    6. Click the Factory button.


    Through Hardware

    1. Locate the reset button on the back of the device.
    2. Press and hold the reset button for aprox. 5 seconds.
    3. Release the button and wait for the device to restart.

    :)
     
    XBR Poseidon, Dec 16, 2014
    #1
  2. XBR Poseidon
    XBR Poseidon Guest
    Hitron: Restoring Factory Defaults

    Hitron (Modems/Gateways): Restoring Factory Defaults
    Hitron CGN

    Login Information:

    Default Gateway – 192.168.1.1

    Username – cusadmin

    Password – login





    Restoring Factory Defaults

    Through Firmware

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select WAN/LAN.
    5. Select Backup.
    6. Click the Factory button.


    Through Hardware

    1. Locate the reset button on the back of the device.
    2. Press and hold the reset button for aprox. 5 seconds.
    3. Release the button and wait for the device to restart.
     
    XBR Poseidon, Dec 16, 2014
    #2
  3. XBIR Zeus
    XBIR Zeus Guest
    Hitron: Restoring Factory Defaults

    Hitron (Modems/Gateways): Restoring Factory Defaults
    Hitron CGN3ROG

    Login Information:

    Default Gateway – 192.168.1.1

    Username – cusadmin

    Password – login

    Restoring Factory Defaults

    Through Firmware

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select WAN/LAN.
    5. Select Backup.
    6. Click the Factory button.


    Through Hardware

    1. Locate the reset button on the back of the device.
    2. Press and hold the reset button for aprox. 5 seconds.
    3. Release the button and wait for the device to restart.
     
    XBIR Zeus, Dec 16, 2014
    #3
    Error:Failed to connect to localhost port 9200: Connection refused
Thema:

Hitron: Restoring Factory Defaults