Help STRICT NAT

I have a Ubee dvw324 gatemway wiriles

My console assign static ip

Open all Ports

• 88 (UDP)
• 3074 (UDP y TCP)
• 53 (UDP y TCP)
• 80 (TCP)
• 500 (UDP)
• 3544 (UDP)
• 4500 (UDP)

I enabled UPnP and DMZ in the router

connect network cable

nat is still strict

WAN Blocking When enabled, WAN Blocking blocks PING access to the

WAN Public Gateway IP address that is exposed to the

Internet. When disabled, PING access is allowed to occur,

which is necessary for the remote configuration of some VoIP

phones (e.g., Cisco, Polycom).

Ipsec PassThrough When enabled, allows encrypted IPsec VPN traffic to pass

through the router between the IPsec VPN Client application

on the PC/Mac and the IPsec VPN Concentrator (e.g.,

Barracuda, Cisco, Juniper, etc) for access to the “company

VPN.”

PPTP PassThrough When enabled, allows encrypted PPTP VPN traffic to pass

through the router between the PPTP VPN Client application

on the PC/Mac and the PPTP VPN Server (e.g., Windows

Server, 2013) for access to the “company VPN.”

Remote Config Management Enables or disables access to the device from a remote

system in order to configure settings. Remote management

can be achieved by using SNMP, web/HTTP or telnet.

Multicast Enable Optimizes the bandwidth utilization compared with unicast

(especially video streaming applications).

UPnP Enable Activates Universal Plug and Play (UPnP) when enabled. A

UPnP device can dynamically join a network, obtain an IP

address, convey its capabilities, and learn about other devices

on the network. In turn, a device can leave a network smoothly

and automatically when it is no longer in use. Gaming

consoles and Web cameras are examples of devices that can

use UPnP.

Primary Network Bridged When enabled, all wireless traffic sourced from the primary

SSID will be bridged.

I would like to know what I need enable o disable in NAT ALG Status – Filters to allow (enable) or disallow (disable) protocols to pass through the

DDW365 to connected devices (computers, game consoles, and so on).

RSVP Enables or disables resource reservation protocol (RSVP).

RSVP defines how applications reserve resources and how

they free the reserved resources once they are no longer

needed.

FTP Enables or disables the file transfer protocol (FTP) used to

transfer files from one host to another.

TFTP Enables or disables the trivial file transfer protocol (TFTP) – a

simpler protocol generally used for automated file transfers.

Kerb88 Enables or disables the Kerberos network authentication

protocol which allow nodes to communicate over a non-secure

network using “tickets” on port 88 to prove their identity to one

another.

NetBios Enables or disables the network basic input/output system

(NetBIOS) services related to the OSI session layer. NetBIOS

allows applications on separate computers to communicate

over a LAN.

IKE Enables or disables the network key exchange (IKE) protocol

used to set up a security association (SA) in the IPsec protocol

suite.

RTSP Enables or disables the real time streaming protocol (RTSP)

network control protocol used to establish and control media

sessions between end points.

Kerb1293 Enables or disables the Kerberos network authentication

protocol which allows nodes to communicate over a nonsecure

network using “tickets” on port 1293.

H225 Enables or disables the H.225 protocol used to define

messages and procedures for call signaling, media

packetization, and registration, admission, and status (RAS)

functions.



PPTP Enables or disables the point-to-point tunneling protocol

(PPTP) used to implement a virtual private network.

MSN Enables or disables the Microsoft network protocol used for

instant messaging.

SIP Enables or disables the session initiation protocol application

layer gateway (SIP ALG). SIP ALG inspects protocol

packets and formats SIP message headers and SDP

body to ensure proper signaling. Note: Some hosted VoIP

services prefer this function to be performed by their own

session border controller (SBC) and require the SIP ALG to be

disabled. Some IP-PBXs may require SIP ALG enabled.

ICQ Enables or disables the ICQ instant messaging program.

IRC666x Enables or disables the Internet relay chat (IRC) protocol used

for text messaging.

ICQTalk Enables or disables the ICQTalk instant messaging program.

Net2Phone Enables or disables Net2Phone SIP- and PacketCable-based

VoIP.

IRC7000 Enables or disables the Internet relay chat protocol on TCP

port TCP 7000 used for text messaging and group forums.

IRC8000 Enables or disables the Internet relay chat protocol on UDP

port 8000 used for text messaging and group forums.

Ubee DVW32CB Screenshot AdvancedOptions

:)

 

Xbox One NAT type: Strict.... Help

If it's still strict after you open the proper ports, try resetting your modem and router, then hard reset your console.

This site will help you open the right ports
Open Port

Just select your router and follow the instructions. Do not download anything from the site, it's not necessary. It's a safe site, but port forwarding manually is very easy.

 

Xbox One NAT type: Strict.... Help

I've watched videos on YouTube on how to change it to open & it worked. The question I have is, how do I keep it on open permanently? Every time I turn my Xbox off & then on a few hours later, it's back to strict. It's getting very annoying.