HDMI PORT IS DAMAGED. CAN SOMEONE REPAIR XBOX 1 Scorpio

Yes and no one does repairs

Have you considered filing for repairs or checking with a local repair shop?

you unplugged the hdmi while the unit is on, this can damage the port and other items, there is enough charge in the connector to damage a board and hdmi, i have done this on other devices before, only option now is to get it repaired.

Does the Xbox still show a tinted picture when you hook it up to a different TV?

If it appears with a green tint on another TV, then this may indicate a damaged HDMI port. Does jiggling the HDMI connector affect the picture for better or for worse? For damaged HDMI ports, the system will need to be sent in for repair.

Attepting to rule out the TV as the culprit is a good start. You should check the port by plugging in another HDMI device that you know works using a different cable just to be sure.

First off, try resetting your display settings by doing the following.

1. Remove any discs from the disc tray.

2.Turn off the console.

3. Turn on the console.

Note If you are using an Xbox 360 Wireless Controller, turn on the console by using the Guide button on the controller. Make sure that you use the player 1 controller when you do this. The player 1 controller will have the upper-left light
illuminated.

4. As the console starts, on the controller, press and hold Y while pulling the right trigger. The display settings are reset to the default settings, and then the console automatically restarts.

If that doesn't work then the HDMI cable or the port on your Xbox could have been damaged under the stress.

Try using a different HDMI cable.

If a different HDMI cable doesn't work then try the AV cable that came with the Xbox. If you have the dual Component/Composite cable then make sure that you have the HD switch on the cable in the right position. If it works then your HDMI port is probably
damaged and your console should be sent in for repair.

If it doesn't work then resetting your display settings again. If it works then your HDMI port is probably damaged and if it still doesn't work then your console is probably damaged in some other way. Either way your console should be sent in for repairs.

You can follow the instructions
here to start the repair process.

Also remember to NEVER move your console while it's on and/or while there's a disc in the drive. Doing so can destroy your disc.

Good luck!