HDMI handshake issues after lasted update 6.2.11271.0

Discus and support HDMI handshake issues after lasted update 6.2.11271.0 in XBoX on Consoles to solve the problem; Tivo Roamio Pro connected to XBone. i am having HDMI handshake issues after the latest update 6.2.11271.0. Turning XBone ON and Tivo thinks i am... Discussion in 'XBoX on Consoles' started by Radio Zero, Jul 1, 2014.

  1. Radio Zero
    Radio Zero Guest

    HDMI handshake issues after lasted update 6.2.11271.0


    Tivo Roamio Pro connected to XBone. i am having HDMI handshake issues after the latest update 6.2.11271.0. Turning XBone ON and Tivo thinks i am trying to steam to an unauthorized device due to copyrighted material on my Tivo. a hard reset of XBone fixes
    this issue, but then, sometimes i have video but no audio. "Xbox Turn Off" then wait and "XBone On" usually fixes both Video and Audio issues.

    all HDMI devices are routed through a Pioneer Elite SC-07 receiver.

    also "XBone On" has become a hit or a miss.....

    :)
     
    Radio Zero, Jul 1, 2014
    #1
  2. ingcarlos26
    ingcarlos26 Guest
    PIP w/ Xbox One in TV Mode

    Friendly advice: get a good hdmi cable to connect the set top box to the xbox one. This will help you mitigate any hdcp handshake issues.
     
    ingcarlos26, Jul 1, 2014
    #2
  3. EggsBoxJuan
    EggsBoxJuan Guest
    black screen

    General HDCP / HDMI Handshake problems and guidelines

    When a HDMI / HDCP Handshaking issue occur the easiest way to re-negotiate the handshake is to power cycle the source device or the display. Always wait 10 seconds or longer when the display or source has been power cycled for the HDMI distribution equipment
    to reset hdmi handshake / timing. Some displays may also re-negotiate the handshake when swopping to another input e.g. AV1 ,AV2 or another HDMI Port (wait 10 seconds) and swopping back to correct HDMI Input via remote control. HDMI Distribution equipment
    should never be powered off since it provides the path for the HDCP / HDMI Handshake between source and display. Some devices such as switches and HDMI Switches / Combo splitters also allow for HDMI handshake re-authentication by switching from one input to
    another and back to the input having HDCP handshaking issues. If power cycles on the Display or Source does not prove to be effective power cycle all HDMI equipment (Source, HDMI Distribution Equipment, Receivers / Amplifiers and Displays). If HDCP errors
    still occur you need a firmware upgrade to sort out the HDMI port timing / handshake issues on the source or display. Please contact your Source device, Display or Digital receiver manufacturer for a firmware upgrade and advice on hdmi handshake issues. It
    is often extremely difficult to troubleshoot these issues since the HDTV supplier will blame the source supplier, will blame the digital receiver supplier, will blame the Hdmi Distribution supplier etc. etc. If going through your total home entertainment setup,
    make sure all your equipment has the latest firmware.
     
    EggsBoxJuan, Jul 1, 2014
    #3
  4. Radio Zero
    Radio Zero Guest

    HDMI handshake issues after lasted update 6.2.11271.0

    and yes, i am saying "XBOX" to the XBone, not XBone
     
    Radio Zero, Jul 1, 2014
    #4
    Error:Failed to connect to localhost port 9200: Connection refused
Thema:

HDMI handshake issues after lasted update 6.2.11271.0