hdmi cable won't plug in all the way,Can this make graphical issues like slow rendering...

Hi,

Why won't it go all the way in? If you don't have an all new HDMI 2.1 TV you could try changing the cable or replacing it with another High speed HDMI.

Does your picture display okay with the correct colours?

As for graphics and rendering textures it will have no impact on such things.

P8ntguy,

Change the HDMI cable with a 2.0 or better. Make sure the cable is plugged in all the way on the Xbox One. Run STB (cable/sat box) HDMI Xbox One HDMI TV. Repair/exchange likely won't fix the issue, as the cause is not a "failure" with the Xbox One (at least
it does not sound that way). Try the 'good' HDMI cables, and post back what happens!

-Cheers

In general, this is due to a loose HDMI cable. Can you check to make sure it's plugged in all the way?

Check that the HDMi is plugged in all the way... if it is, try a different HDMi to rule out cable issue.

Is there any way you could try using a different HDMI cable with your current television?

Try unplugging the HDMI cable before plugging in the power block. Once the HDMI cable is unplugged, plug in the power cable and then try turning on the console. If there is no problem when the HDMI cable is in, it is likely to be a problem with either the
cable or the television.

If it works fine when using other cables and a different television, try with the composite cable (3 colour cable) on the original television.

If it works with the composite cable on the original television, it is likely to be a problem with the HDMI cable.

If this is still a problem, try using the HDMI cable with a different television.

If the HDMI cable causes no problem when using it with a different television, it is more likely to be a problem concerning the television.

I hope that can be of some help, apologies if it doesn't make much sense, I tried to word it the best way I could