Hauppauge tv tuner does not stay powered on thru usb port

tuner powers on when first plugged in but within 10 to 15 seconds it powers down. tuner works fine on pc, tried all usb ports on xbox one and restarted xbox one. Any ideas?

:)

 

Solved: Kinect failed to power on.

Problem: The Kinect would fail to power on every time I booted my Xbox from power saving mode. I'd have to unplug and replug in the Kinect for it to work.

Solution: I have the Hauppauge Xbox One USB TV Tuner. Whenever this was connected to my Xbox, the Kinect would disappear on the next hard boot. It didn't matter which port it was installed on, or if I ran it through a powered USB hub or not.

Hypothesis: An OS updates to the Xbox One changed the device initialization process and somehow the Hauppauge Tuner initialization would block/intercept the Kinect device initialization.

XBone OS: 10.0.10586.1202

Kinect Version 4.0.3196.0:7

A bit more of the Saga for those who are interested:

* I first noticed this problem when my Xbox One would fail to turn off the TV. My Kinect, which I use as an IR blaster, wasn't powering on. My device setup hadn't changed for quite some time.

* The Kinect would work fine after I unplugged / replug it in.

* The Kinect would continue to work if I used the Instant On power saving mode. This lead me to suspect it was a device initialization issue, but first I wanted to rule out a USB port or power consumption issue.

* I tested with the Hauppauge on the front left port. Still nothing. I noticed that the device (Tuner) was being initialized very early in the console boot process (the LEDs would come on and then go off again). This is what makes me suspect an initialization
bug.

* I tested with the Hauppauge on both ports via a powered USB hub (To rule out a power draw problem.) Still didn't work

So now I'm stuck with leaving the Hauppague TV Tuner disconnected most of the time until I want to watch over the Air TV.

Here is hoping that Microsoft can patch the XBox OS so I don't have to keep hotswaping the tuner.

NOTE: I also have a Seagate 4GB external drive that I left alone during this whole process.

 

Hauppauge Tuner for XBox One not recognized

I purchased the Hauppauge TV Tuner for Xbox One. When plugged in the two lights come on for about ten seconds then go out. The Xbox never recognizes it's presence. According to Hauppauge the lights are supposed to stay on so thinking
it was defective I got another one. It's doing the exact same thing.

I've tried all the USB ports with and without the extension cord. I've tried plugging in with the Xbox on and off.

The Xbox is network connected and up-to-date.

USB media drives are recognized fine by the Xbox and the tuner is recognized by a computer.

So the problem is looking like it's something to do with the Xbox. Ideas?

 

Channel search was getting hung, stopped search and start again and it started working...I have to does this everytime I make a change. Guessing xbox one need an update for this issue.

 

Stop and restart channel scan

 

Stop and restart channel scan, it gets hung up.