Fritz!Box: UPnP

Fritz!Box (Modems/Gateways): UPnP
I don't see "Allow changes to security settings over UPnP". What I do?

:)

 

Fritz!Box: UPnP

Fritz!Box (Modems/Gateways): UPnP
Fritz!Box 7272

Login Information

• Gateway: Web Server's Default Page
• Username: admin
• Password: password

UPnP

1. Connect a computer to the gateway with an Ethernet cable.
2. Open a web browser on a computer.
3. Type the gateway address, Web Server's Default Page into the web address bar, hit enter.
   
4. Select Home Network from the menu on the left.
5. Select Network from the resulting sub-menu.
6. Select the UPnP tab at the top.
7. Toggle UPnP on or of depending on your scenario.
8. Click the Apply button at the bottom of the screen.

 

Fritz!Box: UPnP

Fritz!Box (Modems/Gateways): UPnP
Fritz!Box 3390

Login Information:

Default Gateway – Web Server's Default Page

Username – there is no username or password unless one is set by the user.

Password –



UPnP

1. Open a web browser.
2. Enter Web Server's Default Page in the address bar. (Or click the link). A username and password is not needed by default. If one was created you will need to enter it here.
   
3. Click "Home Network".
4. Click "Network" in the "Home Network" menu.
5. Click the "Network Settings" tab.
6. Enable the option "Transmit status information over UPnP".
7. Click "Apply" to save your settings.
8. Click "Permit Access" in the "Internet" menu.
9. Click the "Port Forwarding" tab.
10. Enable the option "Allow changes to security settings over UPnP".
11. Click "Apply" to save your settings.

 

I don't see "Allow changes to security settings over UPnP". What I do?