Fritz!Box: Restore Factory Defaults

Fritz!Box (Modems/Gateways): Restore Factory Defaults
Fritz!Box 7272

Login Information

• Gateway: Web Server's Default Page
• Username: admin
• Password: password

Restore Factory Defaults

From Hardware:

1. Locate the back of the device, where the Ethernet port are located.
2. Hold the reset button on the back for 30 seconds. You will need a paperclip, toothpick or pen to hold down the reset button.
   
3. Let go of the reset button and wait about 1 minute for the device to reboot.

From Firmware:

1. Connect a computer to the gateway using and Ethernet cable.
2. Disconnect the Fritz!Box from its power supply.
3. Wait 5 seconds and reconnect the power.
   
   The Device can only be reset within 10 minutes of a reboot.
4. Open a web browser.
5. Navigate to Web Server's Default Page
   
6. Click the Forgot your password link to default the device.

:)

 

Fritz!Box FRITZ!Box 3272: Restoring Factory Defaults

Fritz!Box (Modems/Gateways) FRITZ!Box 3272: Restoring Factory Defaults
Fritz!Box 3272

Login Information:

Default Gateway – Web Server's Default Page

Username – there is no username or password unless one is set by the user.

Password –



Restoring Factory Defaults

Through Firmware

*This device is unique in that it resets via a command entered by handset.

1. Pick up the handset.
2. Dial # 991 * 15901590*
3. The device will now restart with factory settings.

 

Fritz!Box: Restoring Factory Defaults

Fritz!Box (Modems/Gateways): Restoring Factory Defaults
Fritz!Box 7330

Login Information:

Default Gateway – Web Server's Default Page

Username – there is no username or password unless one is set by the user.

Password –





Restoring Factory Defaults

Through Firmware

*This device is unique in that it resets via a command entered by handset.

1. Pick up the handset.
2. Dial # 991 * 15901590*
3. The device will now restart with factory settings.