Fritz!Box: Port Forwarding

Fritz!Box (Modems/Gateways): Port Forwarding
Fritz!Box 7490

Login Information

• Gateway: Web Server's Default Page
• Username: admin
• Password: password

*There have been reports that this device does not require a username and password*



Port Forwarding

1. Connect a computer to the gateway with an Ethernet cable.
2. Open a web browser on a computer.
3. Type the gateway address, Web Server's Default Page into the web address bar, hit enter.
   
4. Select Internet from the menu on the left.
5. Select Permit Access from the resulting sub-menu.
6. Click the New Port Forwarding button.
7. Select Other Applications.
8. Enter a name for the port forwarding rule. (Xbox Live)
9. Set the Protocol to both TCP and UDP if it is available. If it is not two rules will need to be created, one TCP and the other UDP.
   
10. Enter 3074 for both the port and to port.
11. Select your Xbox console from the to computer drop down menu.
12. Click OK to save your settings.
13. Click the New Port Forwarding button.
14. Select Other Applications.
15. Enter a name for the port forwarding rule. (Xbox Live)
16. Set the Protocol to UDP.
17. Enter 3544 for both the port and to port.
18. Select your Xbox console from the to computer drop down menu.
19. Click OK to save your settings.

Disable Port Forwarding

1. Connect a computer to the gateway with an Ethernet cable.
2. Open a web browser on a computer.
3. Type the gateway address, Web Server's Default Page into the web address bar, hit enter.
   
4. Select Internet from the menu on the left.
5. Select Permit Access from the resulting sub-menu.
6. Click the Red X located to the right of any entries referring to Xbox.

:)

 

Fritz!Box: Port Forwarding

Fritz!Box (Modems/Gateways): Port Forwarding
Fritz!Box 7390

Login Information:

Default Gateway – Web Server's Default Page

Username – there is no username or password unless one is set by the user.

Password –



Port Forwarding

1. Open a web browser.
2. Enter Web Server's Default Page in the address bar. (Or click the link). A username and password is not needed by default. If one was created you will need to enter it here.
   
3. Click "Internet".
4. Click "Permit Access" in the "Internet" menu.
5. Click the "Port Forwarding" tab.
6. Click "New Port Forwarding".
7. Select "Other applications" from the "Port forwarding enabled for" list.
8. Enter a name of your choice for the port forwarding rule in the "Name" field.
   
9. Set the protocol to TCP from the "Protocol" drop-down menu.
10. Enter 3074 for both the “From Port” and the “To Port”.
11. Select your Xbox console from the “to computer” drop down.
12. Click “Ok”.
13. Click "New Port Forwarding".
14. Select "Other applications" from the "Port forwarding enabled for" list.
15. Enter a name of your choice for the port forwarding rule in the "Name" field.
    
16. Set the protocol to UDP from the "Protocol" drop-down menu.
17. Enter 3074 for both the “From Port” and the “To Port”.
18. Select your Xbox console from the “to computer” drop down.
19. Click “Ok”.

Disable Port Forwarding

1. Open a web browser.
2. Enter Web Server's Default Page in the address bar. (Or click the link). A username and password is not needed by default. If one was created you will need to enter it here.
   
3. Click "Internet".
4. Click "Permit Access" in the "Internet" menu.
5. Click the "Port Forwarding" tab.
6. Click the red X to the right of the two rules that were created.

 

Fritz!Box: Port Forwarding

Fritz!Box (Modems/Gateways): Port Forwarding
Fritz!Box 7330

Login Information:

Default Gateway – Web Server's Default Page

Username – there is no username or password unless one is set by the user.

Password –

Port Forwarding

1. Open a web browser.
2. Enter Web Server's Default Page in the address bar. (Or click the link). A username and password is not needed by default. If one was created you will need to enter it here.
   
3. Click "Internet".
4. Click "Permit Access" in the "Internet" menu.
5. Click the "Port Forwarding" tab.
6. Click "New Port Forwarding".
7. Select "Other applications" from the "Port forwarding enabled for" list.
8. Enter a name of your choice for the port forwarding rule in the "Name" field.
   
9. Set the protocol to TCP from the "Protocol" drop-down menu.
10. Enter 3074 for both the “From Port” and the “To Port”.
11. Select your Xbox console from the “to computer” drop down.
12. Click “Ok”.
13. Click "New Port Forwarding".
14. Select "Other applications" from the "Port forwarding enabled for" list.
15. Enter a name of your choice for the port forwarding rule in the "Name" field.
    
16. Set the protocol to UDP from the "Protocol" drop-down menu.
17. Enter 3074 for both the “From Port” and the “To Port”.
18. Select your Xbox console from the “to computer” drop down.
19. Click “Ok”.

Disable Port Forwarding

1. Open a web browser.
2. Enter Web Server's Default Page in the address bar. (Or click the link). A username and password is not needed by default. If one was created you will need to enter it here.
   
3. Click "Internet".
4. Click "Permit Access" in the "Internet" menu.
5. Click the "Port Forwarding" tab.
6. Click the red X to the right of the two rules that were created.