Fritz!Box: DMZ

Discus and support Fritz!Box: DMZ in XboX Networking Hardware to solve the problem; Fritz!Box (Modems/Gateways): DMZ Fritz!Box 7490 Login Information Gateway: Web Server's Default Page Username: admin Password: password *There... Discussion in 'XboX Networking Hardware' started by XBR Poseidon, Oct 9, 2014.

  1. XBR Poseidon
    XBR Poseidon Guest

    Fritz!Box: DMZ


    Fritz!Box (Modems/Gateways): DMZ
    Fritz!Box 7490

    Login Information



    *There have been reports that this device does not require a username and password*



    DMZ

    1. Connect a computer to the gateway with an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the gateway address, Web Server's Default Page into the web address bar, hit enter.
    4. Select Internet from the menu on the left.
    5. Select Permit Access from the resulting sub-menu.
    6. Select the Port Forwarding tab.
    7. Click the New Port Forwarding button.
    8. Select Exposed Host from the Port Forwarding Enabled for.
    9. Select your Xbox console.
    10. Click the OK button to save the changes.


    Disable DMZ

    1. Connect a computer to the gateway with an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the gateway address, Web Server's Default Page into the web address bar, hit enter.
    4. Select Internet from the menu on the left.
    5. Select Permit Access from the resulting sub-menu.
    6. Select the Port Forwarding tab.
    7. Click the red X button next to the Exposed host entry.

    :)
     
    XBR Poseidon, Oct 9, 2014
    #1
  2. BobMcFly247
    BobMcFly247 Guest
    Set static IP, Xbox changes IP right back. Thus preventing me from connecting.

    Additional information:

    DMZ is called "exposed host" in the Fritz Box.
     
    BobMcFly247, Oct 9, 2014
    #2
  3. XBR Poseidon
    XBR Poseidon Guest
    Fritz!Box: DMZ

    Fritz!Box (Modems/Gateways): DMZ
    Fritz!Box 7272

    Login Information



    DMZ

    1. Connect a computer to the gateway with an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the gateway address, Web Server's Default Page into the web address bar, hit enter.
    4. Select Internet from the menu on the left.
    5. Select Permit Access from the resulting sub-menu.
    6. Select the Port Forwarding tab.
    7. Click the New Port Forwarding button.
    8. Select Exposed Host from the Port Forwarding Enabled for.
    9. Select your Xbox console.
    10. Click the OK button to save the changes.


    Disable DMZ

    1. Connect a computer to the gateway with an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the gateway address, Web Server's Default Page into the web address bar, hit enter.
    4. Select Internet from the menu on the left.
    5. Select Permit Access from the resulting sub-menu.
    6. Select the Port Forwarding tab.
    7. Click the red X button next to the Exposed host entry.
     
    XBR Poseidon, Oct 9, 2014
    #3
    Error:Failed to connect to localhost port 9200: Connection refused
Thema:

Fritz!Box: DMZ