Fritz!Box: DHCP Reservation

Fritz!Box (Modems/Gateways): DHCP Reservation
Fritz!Box 7330

Login Information:

Default Gateway – Web Server's Default Page

Username – there is no username or password unless one is set by the user.

Password –





DHCP Reservation

1. Open a web browser.
2. Enter Web Server's Default Page in the address bar. (Or click the link). A username and password is not needed by default. If one was created you will need to enter it here.
   
3. Select Advanced Settings.
4. Select System from the sub-menu.
5. Select Expert Mode.
6. Enable the Show expert settings option.
7. Click the Apply button.
8. Select System.
9. Select Network Settings.
10. Click the IP Addresses button.
11. Enter the IP Address and MAC Address of your Xbox console.
12. Click the Apply button.

:)

 

Fritz!Box: DHCP Reservation

Fritz!Box (Modems/Gateways): DHCP Reservation
Fritz!Box 7272

Login Information

• Gateway: Web Server's Default Page
• Username: admin
• Password: password

DHCP Reservation

1. Connect a computer to the gateway with an Ethernet cable.
2. Open a web browser on a computer.
3. Type the gateway address, Web Server's Default Page into the web address bar, hit enter.
   
4. Select Home Network from the menu on the left.
5. Select Network from the resulting sub-menu.
6. Click the Edit () button next to the device that you would like to always have the same IP Address.
   
7. Enable the “Always assign this device the same IPv4 address”
8. Click the Apply button at the bottom of the screen.

 

Fritz!Box: DHCP Reservation

Fritz!Box (Modems/Gateways): DHCP Reservation
Fritz!Box 7490

Login Information

• Gateway: Web Server's Default Page
• Username: admin
• Password: password

*There have been reports that this device does not require a username and password*



DHCP Reservation

1. Connect a computer to the gateway with an Ethernet cable.
2. Open a web browser on a computer.
3. Type the gateway address, Web Server's Default Page into the web address bar, hit enter.
   
4. Select Home Network from the menu on the left.
5. Select Network from the resulting sub-menu.
6. Click the Edit () button next to the device that you would like to always have the same IP Address.
   
7. Enable the “Always assign this device the same IPv4 address”
8. Click the Apply button at the bottom of the screen.