Fritz!Box: Change Wireless Channel

Discus and support Fritz!Box: Change Wireless Channel in XboX Networking Hardware to solve the problem; Fritz!Box (Modems/Gateways): Change Wireless Channel Fritz!Box 7272 Login Information Gateway: Web Server's Default Page Username: admin... Discussion in 'XboX Networking Hardware' started by XBR Poseidon, Oct 9, 2014.

  1. XBR Poseidon
    XBR Poseidon Guest

    Fritz!Box: Change Wireless Channel


    Fritz!Box (Modems/Gateways): Change Wireless Channel
    Fritz!Box 7272

    Login Information



    Change Wireless Channel

    1. Connect a computer to the gateway with an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the gateway address, Web Server's Default Page into the web address bar, hit enter.
    4. Select WLAN from the menu on the left.
    5. Select Radio Channel from the resulting sub-menu.
    6. Select the desired channel. (Channels 1,3,9,11)
    7. Click the Apply button at the bottom of the screen.

    :)
     
    XBR Poseidon, Oct 9, 2014
    #1
  2. XBR Poseidon
    XBR Poseidon Guest
    Fritz!Box FRITZ!Box 3272: Change Wireless Channel

    Fritz!Box (Modems/Gateways) FRITZ!Box 3272: Change Wireless Channel
    Fritz!Box 3272

    Login Information:

    Default Gateway – Web Server's Default Page

    Username – there is no username or password unless one is set by the user.

    Password –



    Change Wireless Channel

    1. Open a web browser.
    2. Enter Web Server's Default Page in the address bar. (Or click the link). A username and password is not needed by default. If one was created you will need to enter it here.
    3. Select WLAN from the menu on the left.
    4. Select Radio Channel from the sub-menu.
    5. Select Adjust Radio channel settings.
    6. Click the Apply button at the bottom of the screen.
    1. Select from the channel drop down the desired network channel. (Channels 1,3,9,11)
     
    XBR Poseidon, Oct 9, 2014
    #2
  3. XBR Poseidon
    XBR Poseidon Guest
    Fritz!Box: Change Wireless Channel

    Fritz!Box (Modems/Gateways): Change Wireless Channel
    Fritz!Box 7490

    Login Information



    *There have been reports that this device does not require a username and password*



    Change Wireless Channel

    1. Connect a computer to the gateway with an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the gateway address, Web Server's Default Page into the web address bar, hit enter.
    4. Select WLAN from the menu on the left.
    5. Select Radio Channel from the resulting sub-menu.
    6. Select the desired channel. (Channels 1,3,9,11)
    7. Click the Apply button at the bottom of the screen.
     
    XBR Poseidon, Oct 9, 2014
    #3
    Error:Failed to connect to localhost port 9200: Connection refused
Thema:

Fritz!Box: Change Wireless Channel