February Update resume and TV On Start issues Kinect Unplugged

I'm having this issue, and have noticed that it only happens when using energy-saving mode AND I start the console with an external hard drive plugged in. If I unplug the external drive first and power on, the kinect operates as it should. Also, if left
in instant-on mode, the kinect operates fine when resuming with the external drive plugged in.

Im having the same issue with my kids system. It happened after the February update and again this morning after Im assuming it tried to get the March update. I hit the power button, it blinks and beeps, then nothing. I even left it completely unplugged
from everything overnight in hopes that would solve the issue. I also tried plugging it into a different HDMI cable/power brick/TV setup and still no luck. Back in February, it started working again after a few hours but no luck after this update. Will
probably have to try getting a hold of support this weekend. There is definitely something about downloading updates that this particular console doesnt like.

Have the same issue here. Trying to get to the bottom of it.

when booting the Xbox up sometimes the Kinect is on, sometimes the Kinect is off. i have to Unplug and Plug back in for normal operation to resume.

if i go to the Kinect settings initially, it does not show up as not connected, i just have a blank screen where the video feedback would be.

getting really annoying now.

I also am in the preview program and this happened to me today. I was watching TV and the screen went black. Now all I get is the black screen after start up. I have tried the following:

Hard Restart (holding the white console button for 15 seconds.)

Really Hard Restart (Unplugging the sucker and letting it sit for 60 seconds.)

New HDMI Cable.

Unplug the Kinect and restart.

I still get the green start up screen but then it goes black. It does however respond to kinect voice commands and those commands appear on screen. So it's not an issue with the HDMI or the TV. :-(

So I just had the same issue. I didn't need to unplug the TV or cable box however forcing the cold boot of the Xbox One by powering down and unplugging the cable for a minute did do the trick. I also did not need to redo my settings...all functioned as
they should including Kinect powering down and on all devices. And I agree with all lets hope there is a fix / update for this cache issue soon.