Fail xbox update 10.0.18363.7196 19h1_release_xbox_dev1910.191016-1200

did everything as stated

console is on 10.0.18363.7196 (19h1_release_xbox_dev_1910.191016-1200)

did the controller firmware update again, this time via cable, it's on 4.8.1908.0 once via xbox, after that i tried it on pc

here is a video where you can "see" my problem

Elite Controller Series 2 - Rumble Trigger Bug

thank you for your patience

Well bad and good news. it got past the first update screen. Then it moved on to the bigger one and failed. it gave me this. : Can't process the update. If the problem persists, go to www.xbox.com/support

Status Code: 3F4b - 4099 - A080 - 1200 - D000 - 0034

Hello Rebroad,

Thanks for coming to the forums. We recommend to post on the
insider forum. As you need to be enrolled in the insider program for dev mode. You are most likely running updates not available to the public.

Thanks,

Brad

I've done all of the things above and nothing works. The download completes without an issue. It gets stuck on the verification process and throws me that error.

You should create your own thread so solutions are tailored to your specific issue.

Check your network connection. Shutdown your console and remove the power cable while you Power cycle your network hardware.

Wait until your network hardware is fully functional again before restoring power to your console and turn it on.

Consider using a wired ethernet cable connection to your network hardware, as WiFi (wireless) may be subject to signal interference.