Error code not being found

Have you checked your nat settings?

Hi there,

Have you tried a reset through the startup troubleshooter screen.

1. Unplug the network cable if you're using a wired network connection.
2. Power off your console, and then unplug the power cord to ensure that the console is completely powered off.
3. Wait 30 seconds, and then plug the power cord back in.
4. Press and hold the BIND button (located on the left side of the console) and the EJECT button (located on the front of the console), and then press the Xbox button on the console.
5. Continue holding the BIND and EJECT buttons for 10-15 seconds.
6. Listen for two “power-up” tones a couple of seconds apart. You can release the BIND and EJECT buttons after the second power-up tone.

When the console powers up, you will see the Xbox Startup Troubleshooter screen click on reset xbox but when it asks to keep my games and apps make sure you click yes.

Please use the Error Code Search tool.

we have and the error code search tool returns nothing, e.g., code not found

Agreed same response the Error Code Search tool indicates "code not found".

Ye Old American hey there



I have run that code through the
error-code database and found that the problem is due to the change you are trying to make, not yet being processed. The solution is that you should wait 24 hours and then try again.



I hope this helps.

Many thanks,

Cloud

Please use the Error Code Search tool.

we have and the error code search tool returns nothing, e.g., code not found

Agreed same response the Error Code Search tool indicates "code not found".

Yes I have been checking in the tool and nothing comes back