Error code E102 10010C02 8B0600007

Hi G3N3RALxGL1TCH,

Please try this:

1. Hold down the power button on the front of your Xbox One console until it fully powers down,
   unplug the power cord, and wait 30 seconds. Please note the console must be fully powered down; the next steps will not work if the console is powered on from connected standby.
   
2. Plug the power cord back in.
3. PRESS the POWER Button then Hold down the Bind button (located on the side of the console next to the USB port)
   and the Eject button (located on the front of the console next to the optical disc slot), continue holding down Bind and Eject until you hear a second “power up” chime.
   
4. Then SELECT Reset this Xbox - This Troubleshooter takes the User to a page that allows them to select full reset or
   reset but keep content (this allows you to keep your installed games and settings!)
   
5. Then you can try to install the latest updates.
6. In case you still receive the error message of 0x8B05000F 0x00000000 0x90070007 it means that there is an issue with the HDD of your console and it needs to be repaired. (You can set your repair order on
   https://support.microsoft.com/en-us/devices)
   

Let us know if this works!

I tried doing this . it did-int work at all any other suggestions.

Hi G3N3RALxGL1TCH,

Please try this:

1. Hold down the power button on the front of your Xbox One console until it
   fully powers down, unplug the power cord, and wait 30 seconds. Please note the console must be fully powered down; the next steps will not work if the console is powered on from connected standby.
   
2. Plug the power cord back in.
   
3. PRESS the POWER Button then Hold down the Bind button (located on the side
   of the console next to the USB port) and the Eject button (located on the front of the console next to the optical disc slot), continue holding down Bind and Eject until you hear a second “power up” chime.
   
4. Then SELECT Reset this Xbox - This Troubleshooter takes the User to a page that allows them to select full reset or
   reset but keep content (this allows you to keep your installed games and settings!)
   
5. Then you can try to install the latest updates.
   
6. In case you still receive the error message of
   0x8B05000F 0x00000000 0x90070007 it means that there is an issue with the HDD of your console and it needs to be repaired. (You can set
   your repair order on https://support.microsoft.com/en-us/devices)
   

Let us know if this works!

It started with an E105 error, I didn't write down the rest of the code. But it quickly changed to E102 10010C02 8B060007. And today when I tried the usb method (offline update) the error code changed to E101 00000503 8B060007.

Since the last preview build, when turning the console on it comes up with "something went wrong", error code, E102 10010c02 8b060007.

Unable to reset to default, unable to offline update, i have an expensive paper weight

Hello Drāgo the Dragon,

Thank you for replying back and updating us on the current status of the issue. At this time, if you have already gone through the troubleshooting steps for both E102 and E101 then the only thing left to do is to send the console in to get repaired.
There are two ways to send the console in for a repair, you can either go through the
Devices Website, which will allow you to register your console to the account and create a repair order. Or you can
Contact Xbox Support for further assistance. In either case you will be able to create a repair order to fix the issues with the console.

If you have any other questions please feel free to reply back letting us know. Thank you again for posting on Xbox Forums.