Enter IPv4 Ip Address for wireleßs x box one x

Post from netgear.com

It may be an IP issue thing or a port forwarding issue. So try the following

Check the IP address of your console. Make sure the first 3 numbers in the IP

address match the first 3 numbers in the IP address of the gateway.



Example

X box: 192.168.1.25

Gate Way: 192.168.1.1

If they are not the same change the x box consoles IP to match the first

three numbers of the gateway. The last number can be anything and should

not be the same. If everything is good then move on.

Also make sure the sub net of the X box matches the sub net of the gateway

Example

Gateway: 255.255.255.0

X Box: 255.255.255.0

Next make sure your x box default gate way matches the IP address of your gateway ( router/ modem )

Example:

If your gateway IP is 192.168.1.1 then the x box default gateway should be the same. If all is good them move on

Next log into the gateway ( router/ modem ) and make sure these ports are open for communication

Port 88 (UDP)

Port 3074 (UDP and TCP)

Port 53 (UDP and TCP)

Port 80 (TCP)

Here is a forum link from X box to walk you through port forwarding.

https://forums.xbox.com/en-GB/thread/BF44823E-801E-44EF-8C1F-1B9B83AADAE6

I'm not sure you follow. When I go to Join X-box Live i enter my one and only hotmail email address and then i enter my password for that email address the x-box then tells me i can't use those details because they are already used by another user. That
is because I mistakenly joined x-box live via the internet (using a browser on a PC) before I even tried to join using the x-box console.

So I have my x-box live account I created using a browser on my PC and I want to associate that account with my local profile on my x-box.

I hope you understand.

Dave, Access your router and then go to

Home -> Advanced settings -> Security -> DMZ inside the router, click the box to enable DMZ and then manually check the ip address on the console. Go to Settings -> Network -> You should see the ip address near the left corner of the screen which says ip
address.

When you have the ip Go to dmz on the router, enable the tick and then tipe in the last number of your ip address in the box in the DMz , so it should be something like 192.168.0.X -> X is the number that you need to find out from the console. If this works,
set up static ip on the xbox go to network settings -> advanced settings -> select manual and it will tell you to enter the subnetmask, DNS and Ip address.

Subnet mas is always the same so check the automatic one. Gateway is also the same, so check the manual one. The ip address change it a bit for example if you 192.168.0.1 add +5 to this 1 and put 192.168.0.6 and then also change it in dmz settings to that
6. This way the ip will stay constantly the same and if dmz fixes this you will have no disconnects at all.

It seems that when the xbox decides for some reason connect via ipv4 it cant access the live service. It is on the network and actually has an ip address but cannot function.

unfortunatly once it has done this you can only enter an ipv4 ip. This is on wired and wireless. Only answer is keep restarting until it decides ipv6 is possible.

IPv4 Address. . . . . . . . . . . :[Mod Removed]

That one?

And on xbox - IP Address :[Mod Removed]