DVI Monitor 'No Signal Detected' Issue

I've bought a Forza 6 Limited Edition Xbox One the other day, and been trying to get it to work with my PC monitor ever since, with no luck.

The monitor is a 24" 1920x1080 BenQ BL2410PT and has DisplayPort, VGA and DVI ports. Naturally, I used a HDMI to DVI cable to hook the Xbox up, but I got a 'No Signal Detected' message on the monitor. So I went and searched some forums for some answers.
At this point I've tried everything I found about this problem on the web, none of them fixed my issues. I connected the Xbox to a TV to be able to access the display settings. I set the output to DVI as mentioned in the official support article, but it didn't
help. I then started to change the other settings, too, to see if I get lucky with one of them, and eventually I tried out every possible combination of the settings in the display setup menu (resolution, output, color space, 50Hz). None of them gave me a
picture on my PC monitor. It's not the cable either, since I use the same cable to connect the HDMI output of my PC to the monitor, and it works perfectly.

I'm getting really desparate. There's no way that the monitor is not compatible, since it's a 2 year old modern Full HD monitor.

:)

 

DVI to HDMI Adapter for Monitor was working, but now isn't...

Hey all,

So I've been using an HDMI to DVI adapter since December 2015 to play my Xbox One on my Dell Monitor, and it's been working great until this past week when my monitor no longer detected a source on my DVI input (it goes into Energy Saving sleep mode). When
I unplug my HDMI cable, the monitor changes and says it detects no input. Here's my setup -

HDMI cable from Xbox One into Female end of HDMI-DVI adapter

HDMI-DVI adapter plugged into DVI port of my monitor

To troubleshoot the issue, I've tried a new HDMI cable, new adapter, and a different monitor, all to no avail. I checked if it was my Xbox One by plugging it into a friends HDMI-compatible monitor, and it worked just fine on his monitor, then came back to
mine and same issue - no detection.

I doubt it's an update, because my Xbox isn't connected to the internet (I know this is a mass sin, using DVI and no Internet for such a powerful system, but the school I'm at is Draconian in it's internet security).

So, I'm stuck with buying a new HDMI monitor to play my system - but in the interest of pinching some more pennies I thought I would open up the question here first.

Any help is much appreciated!!

 

Converted Signal not outputting

Hello everyone, not sure where this goes so i posted here, i have a BenQ G2220HD 21.5" monitor which supports full 1080p HD, my Xbox Component cables to plug into my Roxio Game Capture, a Component to HDMI Converter, and a HDMI to DVI-D cable, i connect
these all together in the order - Component Cable - Roxio - Converter - Monitor (HDMI to DVI-D Cable), and i get No Signal, but when i use my xbox's HDMI out with the HDMI to DVI-D cable, i get my full 1080P display.

Note: Its a black signal, not No signal.

Also, if this wont work, will the HDFury Gamer Edition work from the converter to my Monitor? Thanks in advance.