DTS:X for speakers Bitstream problem?

when will 5.1 be available through the optical output port? I know bitstream and DTS is available, but that configuration doesn't give any output to the center channel speaker

Problem solved. I swapped over the sound settings to "bitstream out" and changed the signal to DTS Surround Sound. Now I have sound coming out of my rear speakers. Watch Dogs has a very weak rear audio track.

I have everything running through my receiver / HDMI. It doesn't matter what I change it to, bitstream DTS, DD, HDMI 5.1 or 7.1. The only way to get surround sound audio is to change it to stereo and then fake it on the receiver w/ prologic... if I leave
it on any of the above settings the only speakers that work are left and right channel speakers even though the receiver says its sending the signal to all five speakers.. Never had a problem until the april update.

That's not right. I connect with a hdmi cable, not with an optical cable. The problem is that you do not add the Dolby true hd and dts hd master audio format to the xbox one x console bitstream part.

In the settings, you can turn off the sounds for the snapped app. It would make sense if one were to turn off snapped sounds, that the Xbox wouldn't have to do any encoding.

Right now, I select Bitstream (both DTS and Dolby) and my rear channels are NOT discrete. They sound like Pro Logic II, where a stereo signal is used to create rear sounds - basically the sounds leak out of the front speakers too.

I don't think the Bitstream DTS or Dolby signal I'm getting is 5.1 channels.